User's Manual

3
ASSEMBLY
5
5) To attach the pinpointer coil, insert the hard-shell case over the pointer coil
and push half-way forward.
6) Then, twist the coil clockwise to tighten. Lastly, push the hard-shell case all
the way so it clicks into place.
IMPORTANT! The pinpointer coil is designed to fit very tightly to provide a
waterproof seal. When you want to detach or attach the pointer coil, insert
the hard-shell case over the pointer coil half-way and twist the pointer coil
with the help of the hard-shell case.
IMPORTANT! You must not detach and/or change the scuba or the pinpointer
coil underwater!
6
3 4
3) Hold the pinpointer coil so that the threads are properly aligned.
4) Insert the pinpointer coil into the control unit and push.