User's Manual

2
The PulseDive comes with the scuba coil attached. If you want to use the
pinpointer coil, please follow the steps in the pictures. If you want to re-attach
the scuba coil, repeat the steps in reverse order.
1) To detach the scuba coil, turn it counter clockwise.
2) Pull the scuba coil out of the control unit.
ASSEMBLY
1 2
IMPORTANT! Do not hold the scuba coil cover from its front end while removing
it. Hold it from the rear end as shown in the picture below to avoid breaking the
coil.
IMPORTANT! When changing coils,
align the plastic tab on the control
unit with the opposing groove on the
coil and twist clockwise to secure.