User Guide Nokia Treasure Tag (WS-2) Issue 2.
User Guide Nokia Treasure Tag (WS-2) Contents Get started 3 Pair and connect 5 Set up your sensor 7 Find your sensor 7 Set your sensor to mute automatically 8 Find your phone using your sensor 9 Take a photo remotely 9 Change the battery 9 Troubleshooting and support 11 Product and safety info 12 Copyrights and other notices 12 Warranty 13 © 2014 Microsoft Mobile. All rights reserved.
Get started Learn how to start using your proximity sensor. About your proximity sensor Nokia Treasure Tag (WS-2) is a proximity sensor which helps you easily find your misplaced valuables. Slip the sensor in your bag, or use the strap to attach it to your keys. If you leave your items behind, your phone notifies you. If you do lose your stuff, you can check on a map where to start looking. The proximity sensor is compatible with Windows Phone 8 or later phones with the Treasure Tag app and Bluetooth 4.
To switch your sensor off, you can also remove the battery. Change the strap Your sensor comes with two silicone straps: one with a loop for attaching, one without. 1. Pull the strap from the sensor. You can use a paperclip or similar tool to carefully pry the edge of the strap from the groove. 2. Place the sensor in the other strap and carefully stretch and pull the strap into place. © 2014 Microsoft Mobile. All rights reserved.
Pair and connect Before you can use your sensor, you need to pair and connect it to your phone. You can connect your sensor to your phone using either NFC or Bluetooth. Make sure your sensor is switched on and you have a SIM in your phone. Your sensor can be connected to one phone at a time, and your phone can have up to 4 sensors connected to it. To locate the phone currently connected to your sensor, press the multifunction key while in range, and the phone plays a notification tone.
2. On your phone, tap Treasure Tag. 3. Select your sensor, and follow the instructions shown on the phone. © 2014 Microsoft Mobile. All rights reserved.
Basic use Learn the basics of using your proximity sensor. Set up your sensor Define how and when your sensor alerts you. On your phone, tap Treasure Tag. 1. When pairing for the first time, the setup starts automatically. Otherwise, on your phone, tap SET UP TAG under your sensor. 2. To choose an icon for your sensor, tap add icon and the icon you want. 3. To give your sensor a name, tap TAG NAME, and type in the name. 4. Select how and where the alert is played.
Using services or downloading content, including free items, may cause the transfer of large amounts of data, which may result in data costs. 1. Make sure you've switched on GPS on your phone. 2. Tap Treasure Tag and the sensor you want. 3. Wait while your phone tries to search for the sensor. 4. If your phone doesn't find the sensor, tap open map. The approximate area where your phone last connected to the sensor is shown on the map.
Find your phone using your sensor Can't remember where you put your phone? Use your sensor to locate it. 1. Press the multifunction key. Your phone plays a notification sound to help you locate it, even if your phone is in silent mode. 2. When you find your phone, tap the notification on your phone to switch off the notification sound.
2. Carefully lever the back cover up. 3. Replace the old battery with a new one. Make sure you place the battery in the right way. 4. Align the cut corners on the back cover and device, and snap the cover back into place. Restore factory settings You can clear all pairings and reset the sensor back to the original settings. 1. Open the back cover and remove the battery from the sensor. 2. Replace the battery while pressing the multifunction key.
Troubleshooting and support To get the most out of your device, go to www.nokia.com/support. There you can find full-length user guides, troubleshooting info, discussions, and details about features, technologies, and compatibility. Troubleshooting and discussions may not be available in all languages. © 2014 Microsoft Mobile. All rights reserved.
Product and safety info Wet and dusty conditions • • • • • • This product is water-resistant and dust-resistant in compliance with protections rating . Important: Accessories for use with this device are not as durable, dust-resistant, or water-resistant as the device. For example, chargers should only be used in dry conditions, never when damp or wet. The device is water-resistant against cold, clean fresh water only. Do not expose the device to any other type of liquid, such as sea water.
Hereby, Microsoft Mobile Oy declares that this WS-2 product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. A copy of the Declaration of Conformity can be found at www.nokia.com/global/declaration/ declaration-of-conformity. The availability of products may vary by region. For more info, contact your dealer. This device may contain commodities, technology or software subject to export laws and regulations from the US and other countries.
