User Guide Nokia Treasure Tag (WS-2) Issue 2.
User Guide Nokia Treasure Tag (WS-2) Contents Get started 3 Pair and connect 5 Set up your sensor 7 Find your sensor 7 Find your phone using your sensor 8 Change the battery 9 Help and support 10 Product and safety information 11 Copyrights and other notices 11 Warranty 12 © 2014 Microsoft Mobile. All rights reserved.
Get started Learn how to start using your proximity sensor. About your proximity sensor Nokia Treasure Tag (WS-2) is a proximity sensor which helps you easily find your misplaced valuables. Slip the sensor in your bag, or use the strap to attach it to your keys. If you leave your items behind, your phone notifies you. If you do lose your stuff, you can check on a map where to start looking.
To switch your sensor off or back on again, press the multifunction key for 3 seconds. To switch your sensor off, you can also remove the battery. Change the strap Your sensor comes with two silicone straps: one with a loop for attaching, one without. 1. Pull the strap from the sensor. You can use a paperclip or similar tool to carefully pry the edge of the strap from the groove. 2. Place the sensor in the other strap and carefully stretch and pull the strap into place. © 2014 Microsoft Mobile.
Pair and connect Before you can use your sensor, you need to pair and connect it to your phone. You can connect your sensor to your phone using either NFC or Bluetooth. Make sure your sensor is switched on and you have a SIM in your phone. Your sensor can be connected to one phone at a time, and your phone can have up to 4 sensors connected to it. To locate the phone currently connected to your sensor, press the multifunction key while in range, and the phone plays a notification tone.
2. On your phone, tap Nokia Treasure Tag. 3. Select your sensor, and follow the instructions shown on the phone. © 2014 Microsoft Mobile. All rights reserved.
Basic use Learn the basics of using your proximity sensor. Set up your sensor Define how and when your sensor alerts you. On your phone, tap Nokia Treasure Tag. 1. When pairing for the first time, the setup starts automatically. Otherwise, on your phone, tap Set up under your sensor. 2. To choose an icon for your sensor, tap add icon and the icon you want. 3. To give your sensor a name, tap SENSOR NAME, and type in the name. 4. Select how and where the alert is played.
Using services or downloading content may cause the transfer of large amounts of data, which may result in data costs. 1. Make sure you've switched on GPS on your phone. 2. Tap Nokia Treasure Tag and the sensor you want. 3. Wait while your phone tries to search for the sensor. 4. If your phone doesn't find the sensor, tap open map. The approximate area where your phone last connected to the sensor is shown on the map.
2. When you find your phone, tap the notification on your phone to switch off the notification sound. Change the battery Your sensor comes with a battery already inserted, but eventually you need to change it. Your sensor uses a standard CR2032 battery. When the battery is completely empty, you need to replace it with a new one before you can use the sensor again. When the battery runs low, your sensor plays an alert tone, and a notification shows up on your phone's Nokia Treasure Tag app.
Help and support When you want to learn more about your device, or if you're unsure how your device should work, there are several support channels for you to check. To help you get the most out of your device, you can explore www.nokia.com/support. There you can find: • • • • Troubleshooting info Discussions News on apps and downloads Further details about features and technologies, and the compatibility of devices and accessories Troubleshooting and discussions may not be available in all languages.
Product and safety information Wet and dusty conditions • • • • • • This product is water-resistant and dust-resistant in compliance with protections rating . Important: Accessories for use with this device are not as durable, dust-resistant, or water-resistant as the device. For example, chargers should only be used in dry conditions, never when damp or wet. The device is water-resistant against cold, clean fresh water only. Do not expose the device to any other type of liquid, such as sea water.
Hereby, Microsoft Mobile Oy declares that this WS-2 product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. A copy of the Declaration of Conformity can be found at www.nokia.com/global/declaration/ declaration-of-conformity. The availability of products may vary by region. For more info, contact your dealer. This device may contain commodities, technology or software subject to export laws and regulations from the US and other countries.
