User Guide

GPS data
GPS data is designed to provide route guidance information
to a selected destination, position information about your
current location, and traveling information, such as the
approximate distance to the destination and approximate
duration of travel.
Select Menu > Applications > Location and GPS data.
Route guidance
Route guidance shows the straightest route and the
shortest distance to the destination, measured in a straight
line. It ignores any obstacles on the route, such as buildings
and natural obstacles, or differences in altitude. Route
guidance is active only when you move. Start the route
guidance outdoors to receive the necessary information from
the satellites.
Select Menu > Applications > Location and GPS data >
Navigation.
Set your destination
Select Options > Set destination and a landmark as the
destination, or enter the latitude and longitude coordinates.
Clear the destination
Select Stop navigation
Retrieve position information
You can view the position information of your current
location and an estimate of the accuracy of the location.
Select Menu > Applications > Location and GPS data >
Positioning.
Save your current location as a landmark
Select Options > Save position. Landmarks can be used in
other compatible applications and transferred between
compatible devices.
Trip meter
With the trip meter, you can calculate the distance, speed,
and time of your trip. Use the trip meter outdoors to receive
a better GPS signal.
Select Menu > Applications > Location and GPS data >
Trip distance.
Start calculating the trip distance
Select Options > Start. The calculated values remain on the
display.
Start a new calculation
Select Options > Reset. This sets the trip distance and time
and average and maximum speeds to zero.
Set the odometer and total time to zero
Select Options > Restart.
The trip meter has limited accuracy, and rounding errors may
occur. Accuracy can also be affected by availability and quality
of GPS signals.
© 2011 Nokia. All rights reserved. 65