User Guide

Wi-Fi internet access points
Select Menu > Settings and Connectivity >
Destinations > Access point, and follow the instructions.
To edit a wireless LAN (Wi-Fi) access point, open one of the
access point groups, and select an access point marked with
.
Follow the instructions from your Wi-Fi service provider.
Select from the following:
Wi-Fi network name — Select Enter manually or Search
for networks. If you select an existing network, Wi-Fi
network mode and Wi-Fi security mode are determined by
the settings of its access point device.
Network status — Define whether the network name is
displayed.
Wi-Fi network mode — Select Ad-hoc to create an ad hoc
network and to allow devices to send and receive data
directly; a Wi-Fi access point device is not needed. In an ad
hoc network, all devices must use the same Wi-Fi network
name.
Wi-Fi security mode — Select the encryption used: WEP,
802.1x, or WPA/WPA2 (802.1x and WPA/WPA2 are not
available for ad hoc networks). If you select Open network,
no encryption is used. The WEP, 802.1x, and WPA functions
can be used only if the network supports them.
Homepage — Enter the web address of the starting page.
Use access point — Set the device to create a connection
using this access point automatically or after confirmation.
Available options may vary.
View your active data connections
Select Menu > Settings and Connectivity > Connection
mgr..
In the active data connections view, you can see your data
connections:
data calls
packet data connections
Wi-Fi connections
Close a connection
Select Options > Disconnect.
Close all open connections
Select Options > Disconnect all.
View the details of a connection
Select Options > Details.
Synchronization
With the Sync application, you can synchronize your notes,
messages, contacts, and other information with a remote
server.
Select Menu > Settings > Connectivity > Data transfer >
Sync.
You may receive synchronization settings as a configuration
message from your service provider.
© 2011 Nokia. All rights reserved. 55