User Guide

1Select Menu > Settings and Connectivity > Wi-Fi.
2 To increase the background scan time interval, adjust the
time in Scan for networks. To stop background scans,
select Show Wi-Fi availability > Never.
3 To save your changes, select Back.
When Show Wi-Fi availability is set to Never, the Wi-Fi
availability icon is not displayed in the home screen.
However, you can still manually scan for available Wi-Fi
networks, and connect to Wi-Fi networks as usual.
Q: What do I do if the memory is full?
A: Delete items from the memory. If Not enough memory
to perform operation. Delete some data first. or Memory
low. Delete some data from phone memory. is displayed
when you are deleting several items at the same time, delete
items one by one, beginning with the smallest items.
Q: Why can’t I select a contact for my message?
A: The contact card does not have a phone number, address,
or e-mail address. Select Menu > Contacts and the relevant
contact, and edit the contact card.
Q: How can I end the data connection when the device
starts a data connection again and again?
A: The device may be trying to retrieve a multimedia message
from the multimedia message center. To stop the device from
making a data connection, select Menu > Messaging and
Options > Settings > Multimedia message > Multimedia
retrieval. Select Manual to have the multimedia messaging
center save messages to be retrieved later, or Off to ignore
all incoming multimedia messages. If you select Manual, you
receive a notification when you have a new message in the
multimedia message center. If you select Off, the device does
not make any network connections related to multimedia
messaging.
To set the device to use a packet data connection only if you
start an application or action that needs it, select Menu >
Settings and Connectivity > Admin. settings > Packet
data > Packet data connection > When needed.
If this does not help, switch the device off and then on again.
Q: Can I use my Nokia device as a fax modem with a
compatible PC?
A: You cannot use your device as a fax modem. However, with
call diverting (network service), you can divert incoming fax
calls to a fax number.
Q: How do I calibrate the screen?
A: The screen is calibrated at the factory. If it is necessary to
recalibrate the screen, select Menu > Settings and Phone >
Touch input > Touch screen calibration. Follow the
instructions.
© 2011 Nokia. All rights reserved. 115