User's Manual

Camera
25
Video stabilization—Select On to reduce camera shake
when recording the video.
Add to album—Select whether you want to add the recorded
video clip to a certain album in Gallery. Select Yes to open
a list of available albums.
Show captured video—Select whether you want the first
frame of the recorded video clip to be shown on the display
after the recording stops. Select Play from the toolbar
(main camera) or Options > Play (secondary camera) to
view the video clip.
Optical zoom during recording—Select On or Off. Select
Off to eliminate mechanical noise caused by lens movement
during optical zooming when recording.
Memory in use—Define the default memory store: device
memory or memory card (if inserted).
Take pictures
To activate the main camera, rotate the display to image
mode. If the camera is in video mode, use the camera mode
key, or select Options > Switch to image mode, to switch
to image mode.
To lock the focus on an object, press the capture key halfway
down (main camera only). The green locked focus indicator
appears on the display. If the focus was not locked, the red
focus indicator appears. Release the capture key, and press
it halfway down again. You can, however, take the picture
without locking the focus.
To take a picture, in the main camera, press the capture key.
Do not move the device before the image is saved.
To make lighting and color adjustments before taking a
picture in image mode, scroll through the toolbar. See
"Setup settings—adjust color and lighting", p. 27.
Saving the captured image may take longer if you change
the zoom, lighting, or color settings.
The camera viewfinder displays the following:
• Status indicators
(1) for sequence
on, self-timer
on; Automatic
(), On (),
or Off ()
flash mode, and
the current
capture mode.
• The toolbar (2),
which you can scroll through before capturing the image
to select the shooting mode, white balance, exposure
value, and color tone (the toolbar is not displayed
during focus and image capture).
• The image resolution indicator (3) indicates whether the
quality of the image is Print 3M - Large (2048x1536
resolution), Print 2M - Med. (1600x1200 resolution),
Print 1.3M - Small (1280x960 resolution), or MMS
0.3M (640x480 resolution).
Exit
Options