User Guide

Training and Vendor Development
CMO Operations & Logistics
Multimedia Creation & Support CONFIDENTIAL
12.Mai.2006
21
Service Manual N93 RM-55 Copyright © 2006 NOKIA Corporation. All rights reserved.
Approved 0.1
MGR
Page
(43)
7. Use new adhesives before placing the Flip PWB Module.
8. Align the Flip PWB Module to the guides and smooth it down
evenly.
9. Hold the switch in position shown and align the hinge over
the Flip B-Cover.
10. Insert two new screws.
11. Fit the torx size 6 bit and set the correct torque.
12. Apply the torque to both screws.