User Guide

6. Select Write calculation parameter -> press Send.

7. RSSI value should be -60 dBm (±3 dBm) and Alignment value 14 (±15).

8. Repeat tuning also for frequencies 610 MHz and 746 MHz. Find setup and reference values from the

following table:

Table 19 DVB-H tuning values

Frequency Signal level

(=amplitude)

Parameter RSSI value Tolerance

474 -30dBm 15 -60dBm +/- 3 dBm

610 -30dBm 15 -60dBm +/- 3 dBm

746 -30dBm 15 -51dBm +/- 3 dBm

Note: Note: if RSSI is 0 dBm and Alignment value 255, tuning was not successfully completed ->

repeat the tuning steps.

RM-100

Nokia Customer Care TV troubleshooting

Page 9 –14 COMPANY CONFIDENTIAL Issue 2