User Guide

Note: Combination #3 occurs only in service, when TOP DVB-H PWB ASSY has been replaced.

To identify terminal with combination #3, the only way is to disassemble the phone and read version number

from TOP DVB-H PWB ASSY (see red circle in DVB-H PWB ASSY both sides-picture). Phoenix Phone

Information tells only the HW version of the engine module.

Applicable shielding box and antenna coupler for tuning

Tuning has to be performed always with assembled phone by using setup out of Rohde & Schwartz Shielding

Box CMU-Z11, Coupler CMU-Z10 and USB Feed Through CMU-Z13. For details refer to chapter Service tools and

service concepts.

DVB-H tuning procedure

Note: All upper blocks with HWID15 (1PH_15a) must be tuned when upper block or a DVB-H antenna

tuning component has been replaced.

Steps

1. Choose connection type USB.

2. Choose operating mode to Local.

RM-100

Nokia Customer Care TV troubleshooting

Page 9 –12 COMPANY CONFIDENTIAL Issue 2