User Guide

5. Press the start button (see picture below).

6. Monitor the RSSI value in the Tuning Lock Summary field (see figure).

7. CW test result -> RSSI reading -> The RSSI value should be -69 dBm (±3 dBm).

Figure 84 Phoenix DVB-H testing window

Note: CW test result -> RSSI reading (“Signal Quality” feature is not needed).

8. Run DVB-H RX Test also with frequencies 610 MHz and 746 MHz according to following table.

Table 17 Setup and target test values (test option 1)

Frequency Signal level RSSI value Tolerance

474 -30 dBm -69 dBm +/-3 dBm

610 -30 dBm -56 dBm +/-3 dBm

746 -30 dBm -42 dBm +/-3 dBm

Note: Frequency in the table is typed in DVB-H Test/Frequency field. Set signal generator frequency always 1 MHz higher.

RM-100

Nokia Customer Care TV troubleshooting

Page 9 –8 COMPANY CONFIDENTIAL Issue 2