User Guide

12. Connect the phone WCDMA RF port to the communication tester, and click Tune.

13. Change the phone RF adapter from WCDMA port to GSM port.

14. To complete the RF autotuning, click OK.

15. If tuning fails, restore tuning values from a saved file. In the Flashing pull-down select

RF/BB Permanent Memory Settings Preserver. Press Open Select the file and press Write.

Results

Autotuning completed successfully!

message appears.

RM-100

RF Troubleshooting and Manual Tuning Guide Nokia Customer Care

Issue 2 COMPANY CONFIDENTIAL Page 7 –27