User Guide

• GSM1800: 0 (Default = 15)

• GSM1900: 0 (Default = 15)

Figure 61

RF Controls

window

• WCDMA troubleshooting

i Choose Testing→WCDMA→Tx Control.

ii In the

Tx Control

window:

• Select the Algorithm mode tab.

• Set Start level to 0 dBm (Default = 0).

• Set Step size, Step count and Sequence to 0 (Default = 0).

• In the Scrambling code pane set Code class to LONG (Default = LONG), and Code to 16 (Default =

16).

• For DPDCH set the following values:

• Code number: 0

• Code class: 2

• Weight: 15

• For DPCCH set the following values:

• Code number: 0

• Code class: 2

• Weight: 8

• Set Channel to 9750.

• Check the DPDCH enabled check box (Default).

RM-100

RF Troubleshooting and Manual Tuning Guide Nokia Customer Care

Issue 2 COMPANY CONFIDENTIAL Page 7 –19