User Guide

Baseband manual tuning guide

Energy management calibration

Prerequisites

Energy Management (EM) calibration is performed to calibrate the setting (gain and offset) of AD converters

in several channels (that is, battery voltage, BSI, battery current) to get an accurate AD conversion result.

Hardware setup:

• An external power supply is needed.

• Supply 12V DC from an external power supply to CU-4 to power up the phone.

• The phone must be connected to a CU-4 control unit with a product-specific flash adapter.

Steps

1. Place the phone to the docking station adapter (CU-4 is connected to the adapter).

2. Start

Phoenix

service software.

3. Choose File→ Scan Product.

4. Choose Tuning→Energy Management Calibration.

5. To show the current values in the phone memory, click Read, and check that communication between

the phone and CU-4 works.

RM-100

BB Troubleshooting and Manual Tuning Guide Nokia Customer Care

Issue 2 COMPANY CONFIDENTIAL Page 6 –65