User Guide

2. From the Tuning menu choose WCDMA -> Rx Band Response Calibration.

3. Click Start and Tune.

4. Setup the signal generator to correspond the values in the pop-up window:

Frequency: 2113.4MHz

Level: –48 dBm + cable and adapter attenuations

Modulation: FM

Deviation: 500 kHz

Modulation frequency: 50 kHz

5. Click OK.

6. Change frequency to 2166.6 MHz and click OK.

7. Check that the tuned values are within the limits specified in the table below:

Min Max

Frequency compensation low -5 +5

Frequency compensation high -5 +5

RM-42

Nokia Customer Care RF Troubleshooting and Manual Tuning Guide

Page 7–46 Company Confidential 9241872 (Issue 1)