User Guide

3. In the Rx Control window:

Figure 64 Rx Control window

• From the AGC Mode pane, select Algorithm.

• Set Channel to 10700.

• Set AFC Algorithm to OFF (Default = OFF).

Next action

When settings are ready, click Start to activate them.

If settings are changed later on (for example, you give a new channel number), you will need to click Stop and

Start again.

Note: Clicking Stop also disables Tx Control if that was active!

WCDMA RSSI measurement

Before you begin

WCDMA Rx must be activated before RSSI can be measured. See WCDMA Rx chain activation for manual

measurement (Page 7–12).

Steps

1. From the Testing menu in Phoenix, choose WCDMA -> Rx Power Measurement.

2. In the Rx Power Measurement window, choose the following settings:

• Mode: RSSI

• Continuous Mode

RM-42

RF Troubleshooting and Manual Tuning Guide Nokia Customer Care

9241872 (Issue 1) Company Confidential Page 7–13