User Guide

Personalize your device
27
Profiles—Set tones
To set and customize the ringing tones, message alert tones,
and other tones for different events, environments, or caller
groups, press , and select Tools > Profiles. If the currently
selected profile is other than Normal, the profile name is
shown at the top of the display in the standby mode.
To change the profile, press in the standby mode.
Scroll to the profile you want to activate, and select OK.
To modify a profile, press , and select Tools > Profiles.
Scroll to the profile, and select Options > Customize.
Scroll to the setting you want to change, and press to
open the choices. Tones stored on the memory card are
indicated with . You can scroll through the tone list
and listen to each one before you make your selection.
Press any key to stop the sound.
Tip! When you choose a tone, Tone downloads opens
a list of bookmarks. You can select a bookmark and
start connection to a Web page to download tones.
Tip! For information on how to change the alert tone
for the calendar or clock, see “Personalize your
device‚" p. 26.
To create a new profile, select Options > Create new.
Offline profile
The Offline profile lets you use the phone without connecting
to the wireless network. When you activate the Offline
profile, the connection to the wireless network is turned
off, as indicated by in the signal strength indicator. All
wireless phone signals to and from the device are prevented.
If you try to send messages, they are placed in the outbox
to be sent later.
Warning: In the offline profile you cannot make
or receive any calls, except make calls to certain
emergency numbers, or use other features that
require network coverage. To make calls, you must
first activate the phone function by changing
profiles. If the device has been locked, enter the
lock code.
Warning: Your device must be switched on to use
Offline profile. Do not switch the device on when
wireless device use is prohibited or when it may
cause interference or danger.
To leave the Offline profile, press , and select Tools >
Profiles, select another profile, and select Options >
Activate > Yes. The phone re-enables wireless transmissions
(providing there is sufficient signal strength). If a Bluetooth
connection is activated before entering the Offline profile,
it will be deactivated. A Bluetooth connection is automa-
tically reactivated after leaving the Offline profile.
See “Bluetooth connection settings‚" p. 78.