User Guide
Table Of Contents
- INTRODUCTION
- GENERAL REPAIR INFORMATION
- PATHFINDER FOR WORKSHOP STAFF
- EXPLODED VIEW AND COMPONENT DISPOSAL
- SPARE PARTS OVERVIEW
- SPARE PARTS LIST
- SERVICE TOOLS
- SW-UPDATE
- DISASSEMBLY INSTRUCTIONS
- LEGEND FOR QUICK TROUBLE SHOOTER
- QUICK TROUBLE SHOOTER PART 1
- QUICK TROUBLE SHOOTER PART 2
- CAMERA GONOGO TEST
- BLUETOOTH
- GONOGO TEST
- BATTERY TEST
- FORWARDING OF REPAIRS
- ESD PROTECTION REQUIREMENTS
nokia
EOPLE
ns & Logistics
& De
any
CONNECTING P
26 (29) Approved 1.0
CMO Operatio
MGR
WW Service Solutions velopment
Bochum / Germ CONFIDENTIAL 29.6.2005
Service Manual n90 Level 1&2 Copyright © 2005 NOKIA Corporation. All rights reserved.
PAGE
Reference unit, Bluetooth activated Test unit
Settings on the test unit:
• Press the red End key to reach the Home Menu
• From home menu, select the menu button
.
• Select Options
If phone and SIM memory is empty, create one new entry.
• Select Send
• Select Via Bluetooth
If needed (for e.g. after a sw-update), enter a name for this device
Search window appears, if all Bluetooth devices in range will be displayed, the test is successful!
• Press red End key to reach the Home Menu
Note: If the Bluetooth is activated, switch it off!
14. BLUETOOTH
Bluetooth test
You need another Bluetooth device (e.g. 6230) to do a GoNoGo test.
Make sure that Bluetooth is activated in the reference unit. The distance of the devices should be not more than
5m from each other.