User Guide
Table Of Contents
- INTRODUCTION
- GENERAL REPAIR INFORMATION
- PATHFINDER FOR WORKSHOP STAFF
- EXPLODED VIEW AND COMPONENT DISPOSAL
- SPARE PARTS OVERVIEW
- SPARE PARTS LIST
- SERVICE TOOLS
- SW-UPDATE
- DISASSEMBLY INSTRUCTIONS
- LEGEND FOR QUICK TROUBLE SHOOTER
- QUICK TROUBLE SHOOTER PART 1
- QUICK TROUBLE SHOOTER PART 2
- CAMERA GONOGO TEST
- BLUETOOTH
- GONOGO TEST
- BATTERY TEST
- FORWARDING OF REPAIRS
- ESD PROTECTION REQUIREMENTS
nokia
CONNECTING PEOPLE
PAGE 18 (29) Approved 1.0
CMO Operations & Logistics
MGR
WW Service Solutions & Development
Bochum / Germany CONFIDENTIAL 29.6.2005
9.) Protect the LCD with a plastic film.
10.) Remove 2 Torx size 6 screws. For assembly use a
torque of 19 Ncm.
11.) Remove the A-Cover Assy.
12.) Carefully release the Inner K2 LCD from adhesive.
13.) Turn the unit and protect the Outer LCD with a
plastic film.
14.) Carefully remove the Flexfoil connector.
15.) Release the 4 Clips of the Display Shield.
16.) Remove the Outer LCD.
Service Manual n90 Level 1&2 Copyright © 2005 NOKIA Corporation. All rights reserved.