User guide

Include or exclude content
Select an account and the content type to include or exclude.
The available options may vary.
Deactivate sync
Select an account, and deactivate Schedule.
Protect your phone
Set your phone to lock automatically
Want to protect your phone against unauthorised use? Define a security code, and
set your phone to lock itself automatically when you're not using it.
1Select
and Security > Device lock.
2Select Security code, and enter a security code (at least 5 characters). You can
use numbers, symbols, and upper and lower case letters.
Keep the security code secret and in a safe place separate from your phone. If
you forget the security code, and cannot recover it, your personal data is deleted
before you can use the phone again. If you've set the number of times you can
enter the wrong security code, your phone deletes your data and resets itself
back to original settings after the last try. If you haven't limited the number of
times, your phone requires service before you can use it again.
3Select Autolock, and define the length of time after which the phone is locked
automatically.
Unlock your phone
1 Press the power key, and swipe from the outside of the screen onto the screen.
You can swipe from any direction.
2 Enter the security code, and select OK.
Tip: You can also tap the screen twice, and swipe from the outside of the screen onto
the screen.
Tip: If you have defined a trusted person, if you ever forget your security code, you
can send them the code in a text message. Select Device lock > Trusted person >
Select trusted person and a contact from the list.
Phone lock settings
Select
and Security > Device lock, and from the following:
Autolock — Set the length of time before the phone locks automatically.
Security code — Change the security code. To use the phone lock, you need to define
a security code.
90 Phone management