Nokia N82 User Guide Issue 3
DECLARATION OF CONFORMITY Hereby, NOKIA CORPORATION declares that this RM-313 product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. A copy of the Declaration of Conformity can be found at http:// www.nokia.com/phones/declaration_of_conformity/. © 2008 Nokia. All rights reserved. Nokia, Nokia Connecting People, Nseries, N82, Navi, N-Gage, Visual Radio, and Nokia Care are trademarks or registered trademarks of Nokia Corporation.
The third-party applications provided with your device may have been created and may be owned by persons or entities not affiliated with or related to Nokia. Nokia does not own the copyrights or intellectual property rights to the third-party applications. As such, Nokia does not take any responsibility for end-user support, functionality of the applications, or the information in the applications or these materials. Nokia does not provide any warranty for the third-party applications.
Contents Contents For your safety ..........................................10 About your device.........................................................11 Network services...........................................................12 Enhancements, batteries, and chargers.....................12 Get connected............................................14 Useful information.....................................15 Help.................................................................................
Positioning (GPS)........................................53 About GPS.......................................................................53 GPS receiver...................................................................54 About satellite signals..................................................54 Position requests..........................................................55 Maps...............................................................................55 About Maps...................................
Contents Connection manager....................................................72 Active data connections.............................................72 Available WLAN networks..........................................72 Bluetooth connectivity.................................................73 About Bluetooth connectivity...................................73 Settings.......................................................................73 Security tips.......................................................
Messaging................................................101 Messaging main view.................................................101 Write text.....................................................................102 Traditional text input..............................................102 Predictive text input................................................102 Tips on text input.....................................................103 Change the writing language.................................
Contents SIM directory and other SIM services........................128 Manage contact groups..............................................128 Office folder..............................................130 Quickoffice...................................................................130 Quickword.................................................................130 Quicksheet................................................................130 Quickpoint......................................................
Small children..............................................................163 Operating environment..............................................163 Medical devices...........................................................163 Implanted medical devices.....................................163 Hearing aids..............................................................164 Vehicles........................................................................164 Potentially explosive environments.....................
For your safety For your safety Read these simple guidelines. Not following them may be dangerous or illegal. Read the complete user guide for further information. SWITCH ON SAFELY Do not switch the device on when wireless phone use is prohibited or when it may cause interference or danger. ROAD SAFETY COMES FIRST Obey all local laws. Always keep your hands free to operate the vehicle while driving. Your first consideration while driving should be road safety.
Remember to make back-up copies or keep a written record of all important information stored in your device. CONNECTING TO OTHER DEVICES When connecting to any other device, read its user guide for detailed safety instructions. Do not connect incompatible products. EMERGENCY CALLS Ensure the phone function of the device is switched on and in service. Press the end key as many times as needed to clear the display and return to the standby mode. Enter the emergency number, then press the call key.
For your safety properly, take it to the nearest authorized service facility. Your device may have preinstalled bookmarks and links for third-party internet sites. You may also access other third-party sites through your device. Third-party sites are not affiliated with Nokia, and Nokia does not endorse or assume liability for them. If you choose to access such sites, you should take precautions for security or content. The images in this guide may differ from your device display.
For your safety power cord of any enhancement, grasp and pull the plug, not the cord.
Get connected Get connected Nokia N82 supports the following connectivity methods: ● 2G and 3G networks ● Bluetooth connectivity — to transfer files and connect to compatible enhancements. See "Bluetooth connectivity", p. 73. ● Nokia AV Connector (3.5 mm) — to connect to compatible headsets, headphones, TVs, or home stereo sets. See "TV-out mode", p. 46. ● USB data cable — to connect to compatible devices, such as printers and PCs. See "USB", p. 76.
Model number: Nokia N82-1 Hereinafter referred to as Nokia N82. Help Your device has context-sensitive help. When an application is open, select Options > Help to access help for the current view. When you are reading the instructions, to switch between help and the application that is open in the background, press and hold . To open help from the main menu, select Tools > Utilities > Help. Select the desired application to view its help topics.
Useful information Software updates Nokia may produce software updates that may offer new features, enhanced functions, or improved performance. You may be able to request these updates through the Nokia Software Updater PC application. To update the device software, you need the Nokia Software Updater application and a compatible PC with Microsoft Windows 2000, XP, or Vista operating system, broadband internet access, and a compatible data cable to connect your device to the PC.
Prolong battery life Many features in your device increase the demand on battery power and reduce the battery life time. To save battery power, note the following: ● Features that use Bluetooth technology, or allowing such features to run in the background while using other features, increase the demand on battery power. Turn Bluetooth technology off when you do not need it.
Useful information UMTS network. To only use the GSM network, press , and select Tools > Settings > Phone > Network > Network mode > GSM. ● The backlight of the display increases the demand on battery power. In the display settings, you can change the time-out after which the backlight is switched off, and adjust the light sensor that observes lighting conditions and adjusts the display brightness. Press , and select Tools > Settings > General > Personalisation > Display and Light timeout or Light sensor.
● Memory low. Delete some data from phone memory. Useful information ● Not enough memory to perform operation. Delete some data first.
Your device Your device Welcome Switch Select from the following: With the Switch application, you can transfer content, such as contacts, between two compatible Nokia devices using Bluetooth connectivity. When you switch on your device, the Welcome application is displayed. ● Sett. wizard — to configure various settings, such as e-mail. For more information on the Settings wizard application, see the guides available at the Nokia product support pages or your local Nokia website.
3. If you select Bluetooth connectivity: To have your device search for devices with Bluetooth connectivity, select Continue. Select the device from which you want to transfer content. You are asked to enter a code on your device. Enter a code (1-16 digits), and select OK. Enter the same code on the other device, and select OK. The devices are now paired. See "Pair devices", p. 75. For some device models, the Switch application is sent to the other device as a message.
Your device Use shortcuts to repeat a transfer After a data transfer, you can save a shortcut with the transfer settings to the main view to repeat the same transfer later. To edit the shortcut, scroll to it, and select Options > Shortcut settings. You can, for example, create or change the name of the shortcut. A transfer log is shown after every transfer. To view the log of a previous transfer, scroll to a shortcut in the main view, and select Options > View log.
Fast downloading High-speed downlink packet access (HSDPA) is supported and active (network service). indicates the connection is on hold and that a connection is available. See "Fast downloading", p. 23. High-speed downlink packet access (HSDPA, also called 3.5G, indicated by ) is a network service in UMTS networks and provides high-speed data downloads.
Your device You can select to lock the keypad automatically after a time-out. See "Security settings", p. 143. Shortcuts When in the menus, instead of using the scroll key, you can use the number keys, #, and * to quickly access the applications. For example, in the main menu, press 2 to open Messaging, or # to open the application or folder in the corresponding location in the menu. To switch between open applications, press and hold .
● Music — Enter Music player and the Now playing view, browse your songs and play lists, or download and manage podcasts. ● Gallery — View your last taken picture, start a slide show of your images, or view media files in albums. ● Games — Try out N-Gage games. ● Maps — View your favourite locations in the Maps application. ● Internet — View your favourite web links in the browser. ● Contacts — Add your own contacts, send messages, or make voice calls.
Your device Your device includes either one of the following applications in the main menu: ● Discover N-Gage application — With this preview application you can get information about the upcoming N-Gage gaming experience, try out game demos, and download and install the full N-Gage application when it becomes available. ● N-Gage application — The full featured application gives you access to the complete NGage experience replacing the Discover N-Gage application in the menu.
When connecting any external device or any headset, other than those approved by Nokia for use with this device, to the Nokia AV Connector, pay special attention to volume levels. Volume and loudspeaker control To increase or decrease the volume level when you have an active call or are listening to a sound, use the volume key. The built-in loudspeaker allows you to speak and listen from a short distance without having to hold the device to your ear.
Your device 28 connection. You can also use Bluetooth connectivity while in the offline profile. To leave the offline profile, press the power key briefly, and select another profile. The device reenables wireless transmissions (providing there is sufficient signal strength).
About the camera Your Nokia N82 has two cameras, a high resolution camera on the back of the device (the main camera, up to 5 megapixels, in landscape mode) and a lower resolution camera on the front (the secondary camera in portrait mode). You can use both cameras to take still pictures and record videos. Your device supports an image capture resolution of 2592x1944 pixels. The image resolution in this guide may appear different.
Camera 3 — Battery charge level indicator 4 — Image resolution indicator, which indicates the quality of the image. The quality of a digitally zoomed picture is lower than that of an unzoomed picture. 5 — Image counter, which displays the estimated number of images you can capture using the current image quality setting and memory in use. The counter is not displayed during image capture. 6 — The device memory ( ) and memory card ( ) indicators, which show where images are saved.
The available options vary depending on the capture mode and view you are in. See "After taking a picture", p. 32. See "After recording a video", p. 37. The active toolbar in Gallery has different options. See "Active toolbar", p. 43. Take pictures Before taking a picture, note the following: ● You cannot take pictures until the xenon flash is fully charged, unless you have set the flash to Off. When the flash is charging, blinks on the display. Charging the xenon flash usually takes a couple of seconds.
Camera Tip: To open Gallery and view the pictures you have taken, press on the side of your device twice. To activate the front camera, select Options > Use secondary camera. To take a picture, press the scroll key. To zoom in or out, scroll up or down. To leave the camera open in the background and use other applications, press . To return to the camera, press and hold the capture key.
See "Still image camera settings", p. 38. In Gallery, pictures with location information are indicated by . Flash The flash is available only in the main camera. Keep a safe distance when using the flash. Do not use the flash on people or animals at close range. Do not cover the flash while taking a picture. The camera of your device has a xenon flash for low light conditions. The xenon flash is not available in the sports scene mode or when Burst is selected in the sequence mode.
Camera The xenon flash is only available in the sequence mode if you define a time interval for taking pictures. To set the camera to take six pictures or the desired number of pictures in sequence (if enough memory is available), in the active toolbar, select Sequence mode. To take six pictures, select Burst. To capture the pictures, press the capture key. To take two or more pictures in a sequence, select the desired time interval.
● Sidelit subject. Strong side light gives a dramatic effect but may be too harsh, resulting in too much contrast. Use a simple background. For portraits and other pictures with people, avoid having your subject in front of a cluttered, complex background that may distract attention from the subject. Move the camera, or the subject, when these conditions cannot be met. Move the camera closer to the object to take clearer portraits.
Camera To display all viewfinder indicators, select Options > Show icons. Select Hide icons to display only the video status indicators, and during the recording, the available record time, zoom bar when zooming, and the selection keys. Record videos Before recording a video, note the following: 1 — Capture mode indicator 2 — Audio mute on indicator 3 — Active toolbar. The toolbar is not displayed during recording. See "Active toolbar", p. 30.
To zoom in or out of the subject, use the zoom key in your device. 4. To stop recording, select Stop. The video clip is automatically saved to the Images & videos folder of Gallery. The maximum length of the video clip depends on the available memory. To activate the front camera, select Options > Use secondary camera. To start recording a video, press the scroll key. To zoom in or out, scroll up or down.
Camera 38 Still image camera settings To change the main settings, in the image mode, select Options > Settings and from the following: ● Image quality — Select Print 5M - Large (2592x1944 resolution), Print 3M - Medium (2048x1536 resolution), Print 2M - Medium (1600x1200 resolution), E-mail 0.8M - Med. (1024x768 resolution), or MMS 0.3M - Small (640x480 resolution). The better the image quality, the more memory the image consumes.
The screen display changes to match any settings you make so that you see how the change affects the pictures or videos. The available settings vary depending on the selected camera. The setup settings are camera specific; if you change the settings in the secondary camera, the settings in the main camera do not change. The setup settings are also shooting mode specific; if you change the settings in the image mode, the settings in the video mode do not change.
Camera 40 ● Video stabilisation — Select On to reduce camera shaking when recording the video. ● Audio recording — Select Mute if you do not want to record sound. ● Add to album — Select whether you want to add the recorded video clip to a certain album in Gallery. Select Yes to open a list of available albums. ● Show captured video — Select whether you want the first frame of the recorded video clip to be displayed after the recording stops.
Gallery Gallery To store and organise your images, video clips, sound clips, and streaming links, or share your files with other compatible Universal Plug and Play (UPnP) devices through wireless LAN (WLAN), press , and select Gallery. Tip: If you are in another application, to view the last saved picture or video clip in Gallery, press on the side of your device. To enter the Images & videos folder main view, press the review key again. View and organise files Press , and select Gallery.
Gallery Images and video clips View images and videos To view your images and video clips, press select Gallery > Images & videos. key on the side of your device. The zooming ratio is not stored permanently. , and Pictures taken and video clips recorded with the camera of your device are stored in Images & videos. Images and video clips can also be sent to you in a multimedia message, as an e-mail attachment, or through Bluetooth connectivity.
Some of the options may also be available through the active toolbar (available when you open an image or a video clip). See "Active toolbar", p. 43. Active toolbar In the Images & videos folder, you can use the active toolbar as a shortcut to different tasks. The active toolbar is available only when you have selected an image or a video clip. In the active toolbar, scroll up or down to different items, and select them by pressing the scroll key.
Gallery To remove a file from an album, open the album, scroll to the file, and press C. The file is not deleted from Images & videos in Gallery. images, and Options > Slide show > Start to start the slide show. Print basket ● Pause — to pause the slide show ● Continue — to resume the slide show, if paused ● End — to close the slide show You can tag images to the print basket, and print them later with a compatible printer or in a compatible printing kiosk, if available. See "Image print", p. 47.
Crop image To crop an image, select Options > Apply effect > Crop, and a predefined aspect ratio from the list. To crop the image size manually, select Manual. If you select Manual, a cross appears in the upper left corner of the image. Use the scroll key to select the area to crop, and select Set. Another cross appears in the lower right corner. Again select the area to be cropped. To adjust the first selected area, select Back. The selected areas form a rectangle that forms the cropped image.
Gallery The video editor supports .3gp and .mp4 video file formats, and .aac, .amr, .mp3, and .wav audio file formats. It does not necessarily support all features of a file format or all the variations of file formats. TV-out mode To view the captured images and video clips on a compatible TV, use a Nokia Video Connectivity Cable. Before viewing the images and video clips on TV, you may need to configure the TV-out settings for the applicable TV system and TV aspect ratio. See "Enhancement settings", p.
With presentations, you can view SVG (scalable vector graphics) files, such as cartoons and maps. SVG images maintain their appearance when printed or viewed with different screen sizes and resolutions. To view SVG files, press , and select Gallery > Presentations. Scroll to an image, and select Options > Play. To pause playing, select Options > Pause. To zoom in, press 5. To zoom out, press 0. To rotate the image 90 degrees clockwise or counterclockwise, press 1 or 3, respectively.
Gallery To change the layout, scroll left or right to browse through the available layouts for the selected printer. If the images do not fit on a single page, scroll up or down to display the additional pages. Print settings The available options vary depending on the capabilities of the printing device you selected. To set a default printer, select Options > Default printer. To select the paper size, select Paper size, the size of paper from the list, and OK.
About home network Your device is compatible with Universal Plug and Play architecture (UPnP). Using a wireless LAN (WLAN) access point device or a WLAN router, you can create a home network and connect compatible UPnP devices that support WLAN to the network, such as your device, a compatible PC, a compatible printer, and a compatible sound system or TV, or a sound system or TV equipped with a compatible wireless multimedia receiver.
Gallery If you use WLAN in a network that does not have encryption, switch off sharing your files with other devices, or do not share any private media files. See "Settings for home network", p. 50. Configure settings Settings for home network ● Home access point — Select Always ask if you want the device to ask for the home access point every time you connect to the home network, Create new to define a new access point that is used automatically when you use the home network, or None.
View and share media files To share your media files with other UPnP compatible devices in the home network, set content sharing on. See "Set sharing on and define content", p. 50. If content sharing is off in your device, you can still view and copy the media files stored in another home network device if it is allowed by the other device. Show media files stored in your device To show your images, videos, and sound clips in another home network device, such as a compatible TV, do the following: 1.
Gallery 5. Press the scroll key, and select Play or Show, and On device or Via home network. 6. Select the device in which the file is shown. To adjust the volume when playing a video or sound clip, scroll left or right. To stop sharing the media file, select Back or Stop (available when playing videos and music). Tip: You can print images saved in Gallery through a home network with a UPnP compatible printer. See "Image print", p. 47. Content sharing does not have to be switched on.
About GPS The Global Positioning System (GPS) is a worldwide radio navigation system that includes 24 satellites and their ground stations that monitor the operation of the satellites. Your device has an internal GPS receiver. A GPS terminal receives low-power radio signals from the satellites and measures the travel time of the signals. From the travel time, the GPS receiver can calculate its location to the accuracy of meters.
Positioning (GPS) access point cannot be used for this service. The packet data internet access point is asked when GPS is used for the first time in your device. To enable or disable different positioning methods, such as Bluetooth GPS, press , and select Tools > Settings > General > Positioning > Positioning methods. GPS receiver The GPS receiver is located in the top of the device.
If your device has found satellites, a bar for each satellite is shown in the satellite info view. The longer the bar, the stronger the satellite signal. When your device has received enough data from the satellite signal to calculate the coordinates of your location, the bar turns black. Initially your device must receive signals from at least four satellites to be able to calculate the coordinates of your location.
Positioning (GPS) When you use Maps for the first time, you may need to define an internet access point for downloading map information for your current location. To change the default access point later, select Options > Settings > Network > Default access point. session, the Maps application zooms in to the capital city of the country you are in based on the information the device receives from the cellular network.
To zoom in or out, press * or #. To switch between the 2D and 3D views, select Options > Map options > 2D/3D. To find a location, select Options > Find place. You can choose to go to your GPS position, find an address, find a point of interest by entering a keyword, find locations nearby, or browse a guide (extra service).
Positioning (GPS) maps are free of charge, but downloading may involve transmission of large amounts of data through your service provider's network. For more information on data transmission charges, contact your service provider. You can view the amount of transferred data from the data counter (kB) shown on the display. The counter shows the amount of network traffic when you browse maps, create routes, or search for locations online.
To search for a location by address, select Options > Find place > By address. You must enter the city and country. To use an address you have saved to a contact card in Contacts, select Options > Find place > By address > Options > Select from contacts. To view a search result on the map, press the scroll key, and select Show on map. To return to the results list, select Back. To view a list of your previous locations, select Options > Find place > Recent.
Positioning (GPS) "Plan a route", p. 59. You can also start navigation by selecting any location on the map or in a results list, and Navigate to. When you use navigation for the first time, you are prompted to select the language of the voice guidance and download the voice guidance files of the selected language. You can also download voice guidance files using Nokia Map Loader. See "Download maps", p. 57.
GPS data GPS data is designed to provide route guidance information to a selected destination, position information about your current location, and traveling information, such as the approximate distance to the destination and approximate duration of travel. Press data. , and select Tools > Connectivity > GPS The coordinates in the GPS are expressed in degrees and decimal degrees format using the international WGS-84 coordinate system.
Positioning (GPS) In the position view, you can view the position information of your current location. An estimate of the accuracy of the location is displayed. To save your current location as a landmark, select Options > Save position. Landmarks are saved locations with more information, and they can be used in other compatible applications and transferred between compatible devices. Trip meter Press , and select Tools > Connectivity > GPS data > Trip distance.
With the Web browser, you can view hypertext markup language (HTML) web pages on the internet as originally designed. You can also browse web pages that are designed specifically for mobile devices, and use extensible hypertext markup language (XHTML), or the wireless markup language (WML). To browse the web, you need to have an internet access point configured in your device. Browse the web Press , and select Web. Shortcut: To start the browser, press and hold 0 in the standby mode.
Web browser session, select Back (available if History list is set on in the browser settings and the current page is not the first page you visit). To go to a previously visited page, select the page. To save a page while browsing, select Options > Tools > Save page. You can save pages and browse them later when offline. You can also group these saved pages into folders. To access the pages you have saved, select Options > Bookmarks > Saved pages.
Mini Map and page overview help you navigate web pages that contain a large amount of information. When Mini Map is set on in the browser settings and you scroll through a large web page, Mini Map opens and shows an overview of the web page you browse. To set Mini Map on, select Options > Settings > General > Mini map > On. To move in Mini Map, scroll left, right, up, or down. When you find the desired location, stop scrolling. Mini Map disappears and leaves you at the selected location.
Web browser The default access point for widgets is the same as in the web browser. When active in the background, some widgets may update information automatically to your device. applications that are Symbian Signed or have passed the Java VerifiedTM testing. Content search 2. Select the appropriate option to purchase the item (for example, "Buy"). 1. Select the link. To search for keywords, phone numbers, or e-mail addresses within the current web page, select Options > Find and the desired option.
You can save URL addresses as bookmarks while browsing on the internet. You can also save addresses received in messages to your bookmarks and send saved bookmarks. To open the bookmarks view while browsing, press 1, or select Options > Bookmarks. To edit the details of a bookmark, such as the title, select Options > Bookmark manager > Edit. In the bookmarks view, you can also open other browser folders. The Web application allows you to save web pages during browsing.
Web browser Connection security If the security indicator ( ) is displayed during a connection, the data transmission between the device and the internet gateway or server is encrypted. The security icon does not indicate that the data transmission between the gateway and the content server (or place where the requested resource is stored) is secure. The service provider secures the data transmission between the gateway and the content server.
Web browser ● Auto. bookmarks — Enable or disable automatic bookmark collecting. If you want to continue saving the addresses of the visited web pages into the Auto. bookmarks folder, but hide the folder from the bookmarks view, select Hide folder. ● Form data saving — If you do not want the data you enter to different forms on a web page to be saved and used the next time you open the page, select Off. ● Cookies — Enable or disable the receiving and sending of cookies.
Connections Connections Your device offers several options to connect to the internet or to another compatible device or PC. Wireless LAN Your device supports wireless local area network (WLAN). With WLAN, you can connect your device to the internet and compatible devices that have WLAN. About WLAN To use WLAN, it must be available in the location, and your device must be connected to the WLAN. Some places, like France, have restrictions on the use of wireless LAN.
When the device is in the offline profile, you can still use WLAN (if available). Remember to comply with any applicable safety requirements when establishing and using a WLAN connection. Tip: To check the unique media access control (MAC) address that identifies your device, enter *#62209526# in the standby mode. WLAN wizard The WLAN wizard helps you to connect to a WLAN and manage your WLAN connections. The WLAN wizard shows the status of your WLAN connections in the active standby mode.
Connections ● Edit access point — Edit the details of an existing IAP. You can also use connection manager to create internet access points. See "Active data connections", p. 72. Operating modes There are two operating modes in WLAN: infrastructure and ad hoc. The infrastructure operating mode allows two kinds of communication: wireless devices are connected to each other through a WLAN access point device, or wireless devices are connected to a wired LAN through a WLAN access point device.
About Bluetooth connectivity You can make a wireless connection to other compatible devices with Bluetooth connectivity. Compatible devices may include mobile phones, computers, and enhancements such as headsets and car kits. You can use Bluetooth connectivity to send images, video clips, music and sound clips, and notes; make a wireless connection to your compatible PC (for example, to transfer files); and connect to a compatible printer to print images with Image print.
Connections to hidden, select Define period. To hide your device from other devices, select Hidden. ● My phone's name — Edit the name shown to other devices with Bluetooth wireless technology. ● Remote SIM mode — To enable another device, such as a compatible car kit enhancement, to use the SIM card in your device to connect to the network, select On. See "Remote SIM mode", p. 75. Security tips Press , and select Tools > Bluetooth.
To pair with compatible devices and view your paired devices, in the main view of Bluetooth connectivity, scroll right. Before pairing, create your own passcode (1 to 16 digits), and agree with the owner of the other device to use the same code. Devices that do not have a user interface have a factory-set passcode. The passcode is used only once. 1. To pair with a device, select Options > New paired device. Devices that are within range are displayed. 2. Select the device, and enter the passcode.
Connections To use the remote SIM mode with a compatible car kit enhancement, activate Bluetooth connectivity, and enable the use of the remote SIM mode with your device. Activate the remote SIM mode from the other device. When the remote SIM mode is on in your device, Remote SIM mode is displayed in the standby mode.
Nokia Video Centre Nokia Video Centre With Nokia Video Centre (network service), you can download and stream video clips over the air from compatible internet video services using packet data or WLAN. You can also transfer video clips from a compatible PC to your device and view them in Video Centre. Video Centre supports the same file formats as RealPlayer. All videos are played in the landscape mode by default. Your device may have predefined services.
Nokia Video Centre 6. When the clip is playing, use the scroll key and the selection keys to control the player. To adjust the volume, press the volume key. Downloads continue in the background if you exit the application. The downloaded videos are saved in Video centre > My videos. To connect to the internet to browse available services that you can add to the main view, select Add new services. Internet videos Internet videos are video clips distributed in the internet using RSS-based feeds.
2. Select Data transfer as the connection mode. A compatible memory card needs to be inserted in the device. 3. Select the videos you want to copy from your PC. 4. Transfer the videos to E:\My Videos in the memory card. The transferred videos appear in the My videos folder in Video Centre. Video files in other folders of your device are not displayed. Settings the transmission of large amounts of data through your service provider's network.
Music folder Music folder Music player Warning: Listen to music at a moderate level. Continuous exposure to high volume may damage your hearing. Do not hold the device near your ear when the loudspeaker is in use, because the volume may be extremely loud. Music player supports files formats such as AAC, AAC +, eAAC+, MP3, and WMA. Music player does not necessarily support all features of a file format or all the variations of file formats. You can also use Music player to listen to podcast episodes.
To switch random play ( Options > Shuffle. ) on or off, select To repeat the current item ( ), all items ( ), or to switch repeat off, select Options > Repeat. If you play podcasts, shuffle and repeat are automatically switched off. To adjust the volume, press the volume key. To modify the tone of the music playback, select Options > Equaliser. To modify the balance and stereo image or to enhance bass, select Options > Audio settings.
Music folder If a compatible memory card is inserted, the playlist is saved to the memory card. To add more songs later, when viewing the playlist, select Options > Add songs. To add songs, albums, artists, genres, and composers to a playlist from the different views of the music menu, select an item and Options > Add to a playlist > Saved playlist or New playlist. To remove a song from a playlist, select Options > Remove.
You can transfer music from a compatible PC or other compatible devices using a compatible USB data cable or Bluetooth connectivity. PC requirements for music transfer: ● Microsoft Windows XP operating system (or later) ● A compatible version of the Windows Media Player application. You can get more detailed information about Windows Media Player compatibility from your device's product pages on the Nokia website. ● Nokia Nseries PC Suite 1.
Music folder Manual synchronisation With manual synchronisation, you can select the songs and playlists that you want to move, copy, or remove. 1. After your device is connected with Windows Media Player, select your device in the navigation pane on the right, if more than one device is connected. 2. In the left navigation pane, browse the music files on your PC which you want to synchronise. 3. Drag and drop songs to the Sync List on the right.
, and select To find more music in different categories of the music menu, select Options > Find in Music store. Nokia Music Store settings The availability and appearance of the music store settings may vary. The settings may also be predefined and not editable. If the settings are not predefined, you may be asked to select the access point to use when connecting to the music store. To select the access point, select Default acc. pt..
Music folder To adjust the volume, press the volume key. To listen to the radio using the loudspeaker, select Options > Activate loudspeaker. To view available stations based on location, select Options > Station directory (network service). To save the current tuned station to your station list, select Options > Save station. To open the list of your saved stations, select Options > Stations.
Warning: Listen to music at a moderate level. Continuous exposure to high volume may damage your hearing. Do not hold the device near your ear when the loudspeaker is in use, because the volume may be extremely loud. Settings Before using Nokia Podcasting, set your connection and download settings. The recommended connection method is WLAN. Check with your service provider for terms and data service fees before using other connections.
Music folder Search Directories The search engine uses the podcast search service you set up in Podcasting > Options > Settings > Connection > Search service URL. To open directories, press , and select Music > Podcasting > Directories. Search helps you to find podcasts by keyword or title. To search for podcasts, press , select Music > Podcasting > Search, and enter the desired keywords. Tip: Search looks for podcast titles and keywords in descriptions, not specific episodes.
When you receive a message with an .opml file using Bluetooth connectivity, open the file to save the file into the Received folder in directories. Open the folder to subscribe to any of the links to add to your podcasts. Downloads After you have subscribed to a podcast, from directories, search, or by entering a URL, you can manage, download, and play episodes in Podcasts. To see the podcasts you have subscribed to, select Podcasting > Podcasts.
Music folder To send the selected podcast or marked podcasts to another compatible device as .opml files as a multimedia message or by Bluetooth connectivity, select Options > Send. To update, delete, and send a group of selected podcasts at once, select Options > Mark/ Unmark, mark the desired podcasts, and select Options to choose the desired action. To open the website of the podcast (network service), select Options > Open web page.
RealPlayer Stream content over the air RealPlayer supports files with extensions such as . 3gp, .mp4, or .rm. However, RealPlayer does not necessarily support all file formats or all the variations of file formats. In RealPlayer, you can only open an rtsp:// URL address. However, RealPlayer plays a .ram file if you open an http link to it in a browser. With RealPlayer, you can play video clips or stream media files over the air without saving them to the device first.
Media folder ● Video — Select whether video clips are automatically repeated after they finish playing. ● Streaming — Select whether to use a proxy server, change the default access point, and set the port range used when connecting. Contact your service provider for the correct settings. Adobe Flash Player Press , and select Applications > Media > Flash Player. Use Adobe Flash Player to view, play, and interact with compatible flash files made for mobile devices.
Digital rights management (DRM) protected content comes with an associated activation key that defines your rights to use the content. If your device has OMA DRM protected content, to back up both the activation keys and the content, use the backup feature of Nokia PC Suite. Other transfer methods may not transfer the activation keys which need to be restored with the content for you to be able to continue the use of OMA DRM protected content after the device memory is formatted.
Media folder 94 To record a telephone conversation, open Recorder during a voice call. Both parties hear a tone every 5 seconds during recording.
You can personalise your device by changing the standby mode, main menu, tones, themes, or font size. Most of the personalisation options, such as changing the font size, can be accessed through the device settings. See "Personalisation settings", p. 141. Themes Press , and select Tools > Settings > General > Personalisation > Themes. You can change the look of the display, such as the wallpaper and icons. To change the theme that is used for all the applications in your device, select General.
Personalise your device To change the profile, select a profile, and Options > Activate. To also change the profile, press the power key in the standby mode. Scroll to the profile you want to activate, and select OK. Tip: To switch between the general and silent profiles in the standby mode, press and hold #. To modify a profile, scroll to the profile, and select Options > Personalise. Scroll to the setting you want to change, and press the scroll key to open the choices.
You can also change the standby mode background image or what is shown in the power saver. See "Themes", p. 95. Modify the standby mode Modify the main menu To switch the active standby on or off, press , and select Tools > Settings > General > Personalisation > Standby mode > Active standby. The active standby display shows application shortcuts, and events from applications such as calendar and player.
Time management Time management Clock Alarm clock Press , and select Applications > Clock. To set a new quick alarm, select Options > New quick alarm. Quick alarms are set for the next 24 hours and they cannot be repeated. To view your active and inactive alarms, scroll right to the alarm tab. To set a new alarm, select Options > New alarm. Define the repetition, if needed. When an alarm is active, is shown. To turn off the sounding alarm, select Stop. To stop the alarm for 5 minutes, select Snooze.
Create a calendar entry Press , and select Applications > Calendar. 1. To add a new calendar entry, scroll to the desired date, and select Options > New entry and one of the following: ● Meeting — to remind you of an appointment that has a specific date and time ● Memo — to write a general entry for a day ● Anniversary — to remind you of birthdays or special dates (entries are repeated annually) ● To-do — to remind you of a task that must be done by a specific date 2. Fill in the fields.
Time management To modify the calendar, select Options > Settings > Calendar alarm tone, Default view, Week starts on, or Week view title. Manage calendar entries To delete several events at a time, go to the month view, and select Options > Delete entry > Before date or All entries. To mark a task as completed, scroll to it in the to-do view, and select Options > Mark as done. You can synchronise your calendar with a compatible PC using Nokia Nseries PC Suite.
Only devices that have compatible features can receive and display multimedia messages. The appearance of a message may vary depending on the receiving device. Messaging main view Press , and select Messaging (network service). To create a new message, select New message. Messaging contains the following folders: Inbox — Received messages, except e-mail and cell broadcast messages, are stored here. ● My folders — Organise your messages into folders.
Messaging Cell broadcast messages cannot be received in UMTS networks. A packet data connection may prevent cell broadcast reception. Write text Your device supports traditional text input and predictive text input. With predictive text, you can enter any letter with a single keypress. Predictive text input is based on a built-in dictionary to which you can add new words. When you write text, is displayed when you write text using traditional text input and when using predictive text input.
4. Start writing the next word. Tips on text input To insert a number in the letter mode, press and hold the desired number key. To switch between the different character modes, press #. To delete a character, press C. To delete more than one character, press and hold C. The most common punctuation marks are available under 1. To scroll them through one by one, if you use traditional text input, press 1 repeatedly. If you use predictive text input, press 1, and then * repeatedly.
Messaging connection settings in place. See "Define the e-mail settings", p. 106. The wireless network may limit the size of MMS messages. If the inserted picture exceeds this limit, the device may make it smaller so that it can be sent by MMS. Check the size limit of e-mail messages with your service provider. If you attempt to send an e-mail message that exceeds the size limit of the e-mail server, the message is left in the Outbox folder, and the device attempts to resend it periodically.
Tip: You can combine images, video, sound, and text to a presentation and send it in a multimedia message. Start to create a multimedia message, and select Options > Create presentation. The option is shown only if MMS creation mode is set to Guided or Free. See "Multimedia message settings", p. 109. 7. To add an attachment to an e-mail, select Options > Insert > Image, Sound clip, Video clip, Note, or Other for other file types. E-mail attachments are indicated by . 8.
Messaging contain malicious software or otherwise be harmful to your device or PC. To save the data from the message, select Options and the corresponding option. When you open a multimedia message ( ), you is shown if may see an image and a message. if video is included. To play sound is included, or the sound or the video, select the indicator. Mailbox You may receive a notification that a multimedia message is waiting in the multimedia message centre.
Press , and select Messaging and a mailbox. When you open the mailbox, the device asks if you want to connect to the mailbox (Connect to mailbox?). To connect to your mailbox and retrieve new e-mail headings or messages, select Yes. When you view messages online, you are continuously connected to a remote mailbox using a data connection. To view previously retrieved e-mail messages offline, select No.
Messaging Delete e-mail messages Press , and select Messaging and a mailbox. To delete the contents of an e-mail message from the device while still retaining it in the remote mailbox, select Options > Delete. In Delete message from:, select Phone only. The device mirrors the e-mail headings in the remote mailbox. Although you delete the message content, the e-mail heading stays in your device.
● Message centres — View a list of all text message centres that have been defined. ● Message centre in use — Select which message centre to use to deliver text messages. ● Character encoding — To use character conversion to another encoding system when available, select Reduced support. ● Receive report — Select whether the network sends delivery reports on your messages (network service).
Messaging message both in and outside your home cellular network. ● Allow anon. msgs. — Select whether you want to reject messages from an anonymous sender. ● Receive adverts — Define whether you want to receive multimedia message advertisements. ● Receive report — Select whether you want the status of the sent message to be shown in the log (network service). ● Deny report sending — Select whether you want to deny your device sending delivery reports of received messages.
To edit the settings for the e-mail you send, select Outgoing e-mail and from the following: ● My e-mail address — Enter the e-mail address given to you by your service provider. ● Outgoing mail server — Enter the IP address or host name of the mail server that sends your email. You may only be able to use the outgoing server of your service provider. Contact your service provider for more information.
Messaging ● IMAP4 folder path (for IMAP4 only) — Define the folder path for folders to be subscribed. ● Folder subscriptions (for IMAP4 only) — Subscribe to other folders in the remote mailbox, and retrieve content from those folders. Automatic retrieval settings Press , and select Messaging > Options > Settings > E-mail > Mailboxes, a mailbox, and Automatic retrieval.
Press , and select Messaging > Options > Settings > Other. Select from the following: ● Save sent messages — Select whether you want to save a copy of the text messages, multimedia messages, or e-mail that you send to the Sent folder. ● Number of saved msgs. — Define how many sent messages are saved to the sent folder at a time. When the limit is reached, the oldest message is deleted. ● Memory in use — Select the memory where you want to save your messages.
Make calls Make calls Voice calls 1. In the standby mode, enter the phone number, including the area code. To remove a number, press C. For international calls, press * twice for the + character (replaces the international access code), and enter the country code, area code (omit the leading zero if necessary), and phone number. 2. Press the call key to call the number. 3. Press the end key to end the call (or to cancel the call attempt).
During an active call, to route the sound from the handset to the loudspeaker, select Options > Activate loudspeaker. If you have attached a compatible headset with Bluetooth connectivity, to route the sound to the headset, select Options > Activate handsfree. To switch back to the handset, select Options > Activate handset. Answer or decline a call To answer the call, press the call key. To mute the ringing tone of an incoming call, select Silence. If you do not want to answer a call, press the end key.
Make calls To add a new person to the call, repeat step 2, and select Options > Conference > Add to conference. Your device supports conference calls between a maximum of six participants, including yourself. To have a private conversation with one of the participants, select Options > Conference > Private. Select a participant, and select Private. The conference call is put on hold on your device. The other participants can still continue the conference call.
The voice tag for a contact is the name or nickname that is saved on the contact card. To listen to the synthesised voice tag, open a contact card, and select Options > Play voice tag. Make a call with a voice tag Note: Using voice tags may be difficult in a noisy environment or during an emergency, so you should not rely solely upon voice dialing in all circumstances. When you use voice dialling, the loudspeaker is in use. Hold the device at a short distance away when you say the voice tag. 1.
Make calls Settings > Phone > Call > Image in video call. Options during a video call 1. To start a video call, enter the phone number in the standby mode, or select Contacts and a contact. To zoom your image in or out, scroll up or down. Even if you denied video sending during a video call, the call is still charged as a video call. Check the pricing with your service provider. To change between showing video or hearing only sound, select Options > Enable, or Disable and the desired option. 2.
To end the video call, press the end key. Video sharing Use video sharing (network service) to send live video or a video clip from your mobile device to another compatible mobile device during a voice call. The loudspeaker is active when you activate Video sharing. If you do not want to use the loudspeaker for the voice call while you share video, you can also use a compatible headset. Requirements Video sharing requires a UMTS connection.
Make calls the settings over the air or give you a list of the needed parameters. To add a SIP address to a contact card, do the following: 1. Press , and select Contacts. 2. Open the contact card (or start a new card for that person). 3. Select Options > Add detail or Share view. 4. Enter the SIP address in the format username@domainname (you can use an IP address instead of a domain name).
To save the live video you shared, select Save to accept the Save shared video clip? query. The shared video is saved in the Images & videos folder in Gallery. If you access other applications while you are sharing a video clip, the sharing is paused. To return to the video sharing view and continue sharing, in the active standby mode, select Options > Continue. Accept an invitation When someone sends you a video sharing invitation, the invitation message displays the sender’s name or SIP address.
Make calls cellular phone is switched on and ready to make calls before you attempt an emergency call. The capability for an emergency call using internet telephony depends on the availability of a WLAN network and your net call provider's implementation of emergency call capabilities. Contact your net call provider to check the internet telephony emergency call capability.
To connect to an internet call service using a hidden WLAN, select Options > Use hidden network. To end the connection to an internet call service, select Options > Disconnect from serv.. Make internet calls When you have activated the internet call feature, you can make an internet call from all applications where you can make a regular voice call. For example, in Contacts, scroll to the desired contact, and select Call > Options > Internet call.
Make calls service-specific software plug-in has been installed in the device. To monitor the approximate duration of your incoming and outgoing calls, select Call duration. Log Note: The actual time invoiced for calls by your service provider may vary, depending on network features, rounding off for billing, and so forth. The log stores information about the communication history of the device.
outgoing event indicated by Pack., and select Options > View details. Make calls To open the general log where you can monitor all voice calls, text messages, or data and WLAN connections registered by the device, scroll right. Subevents, such as a text message sent in more than one part and packet data connections, are logged as one communication event. Connections to your mailbox, multimedia messaging centre, or web pages are shown as packet data connections.
Contacts (phonebook) Contacts (phonebook) In Contacts, you can save and update contact information, such as phone numbers, home addresses, or e-mail addresses of your contacts. You can add a personal ringing tone or a thumbnail image to a contact card. You can also create contact groups, which allow you to send text messages or e-mail to many recipients at the same time. Save and edit names and numbers 1. Press , and select Contacts > Options > New contact. 2.
1. Press the scroll key to open a contact card or go to the groups list, and select a contact group. You can assign default numbers or addresses to a contact card. In this way if a contact has several numbers or addresses, you can easily call or send a message to the contact to a certain number or address. The default number is also used in voice dialling. 3. Select the ringing tone you want to use for the individual contact or the members of the selected group. 2. Select Options > Defaults.
Contacts (phonebook) SIM directory and other SIM services For availability and information on using SIM card services, contact your SIM card vendor. This may be the service provider or other vendor. To see the names and numbers stored on the SIM card, select Options > SIM contacts > SIM directory. In the SIM directory you can add, edit, or copy numbers to contacts, and you can make calls. To view the list of fixed dialling numbers, select Options > SIM contacts > Fixed dial contacts.
Contacts (phonebook) 3. To remove the contact from the group, select Yes.
Office folder Office folder Quickoffice With Quickoffice, you can view .doc, .xls, .ppt, and .txt documents. All file formats or features are not supported. Apple Macintosh is not supported. To use the Quickoffice applications, press , and select Applications > Office > Quickoffice. A list of available files in the .doc, .xls, .ppt, and .txt file formats opens. To open Quickword, Quicksheet, Quickpoint, or Quickmanager, use the scroll key to scroll to the tabs.
To upgrade to a version of Quickpoint that supports editing, when you have a file open, select Options > Upgrade to edit. The upgrade is chargeable. Quickmanager With Quickmanager, you can download software, including updates, upgrades, and other useful applications. You can pay for the downloads by phone bill or credit card. Notes Press , and select Applications > Office > Notes. To write a note, start entering the text. The note editor opens automatically.
Office folder 2. In first Unit field, select the unit from which you want to convert. 3. In the next Unit field, select the unit to which you want to convert. 4. In the first Amount field, enter the value you want to convert. The other Amount field changes automatically to show the converted value. Set base currency and exchange rates Select Type > Currency > Options > Currency rates. Before you can make currency conversions, you must select a base currency and add exchange rates.
The device reverts to the standby mode to save battery power if the barcode reader cannot be activated or if no keys are pressed for 1 minute. Office folder 4. To use the decoded information, select Options and the desired action.
Applications folder Applications folder Calculator Press , and select Applications > Calculator. Note: This calculator has limited accuracy and is designed for simple calculations. To make a calculation, enter the first number of the calculation. Select a function such as add or subtract from the function map. Enter the second number of the calculation, and select =. The calculator performs operations in the order they are entered.
Installation files may be transferred to your device from a compatible computer, downloaded during browsing, or sent to you in a multimedia message as an e-mail attachment or using other connectivity methods, such as Bluetooth connectivity. You can use Nokia Application Installer in Nokia Nseries PC Suite to install an application to your device. If you use Microsoft Windows Explorer to transfer a file, save the file to a compatible memory card (local disk). indicates a .sis or .
Applications folder During installation, the device shows information about the progress of the installation. If you install an application without a digital signature or certification, the device displays a warning. Continue installation only if you are sure of the origin and contents of the application. To start an installed application, locate it in the menu, and select it. If the application does not have a default folder defined, it is installed in the Applications folder in the main menu.
Some Java applications may require that a message be sent or a network connection be made to a specific access point to download extra data or components. In the Application manager main view, scroll to an application, and select Options > Open to change settings related to that specific application. Applications folder ● Default web address — Set the default address used when checking online certificates.
Tools folder Tools folder File manager To browse files and folders in the memory, press , and select Tools > File mgr.. When you open File manager, the device memory view ( ) opens. Scroll right to open the memory card view ( ), if available. To see how much memory different data types use, select Options > Memory details. To find a file, select Options > Find and the memory from which to search. Enter a search text that matches the file name.
To add more applications to the list, in the Voice commands main view, select Options > New application. To add a second voice command that can be used to start the application, select Options > Change command, and enter the new voice command as text. Avoid very short names, abbreviations, and acronyms. To listen to the synthesised voice tag, select Options > Playback. To change voice command settings, select Options > Settings.
Tools folder include connection and other settings used by different applications in your device. Scroll to a server profile, and select Options and from the following: ● Start configuration — Connect to the server and receive configuration settings for your device. ● New server profile — Create a server profile. To delete a server profile, scroll to it, and press C.
Some settings may be preset for the device by your service provider, and you may not be able to change them. General settings In general settings, you can edit the general settings of your device or restore the device to original default settings. You can adjust time and date settings also in the clock. See "Clock ", p. 98. Personalisation settings Press , and select Tools > Settings > General > Personalisation.
Settings device in an upright position. Automatic rotation is not functioning, if you change the display rotation setting manually in an application. When you exit the application, automatic rotation is activated again. Standby mode ● Active standby — Activate shortcuts to applications in the standby mode. ● Shortcuts — Assign a shortcut to the selection keys in the standby mode. If the active standby is set off, you can also assign keypad shortcuts for the different presses of the scroll key.
TV-out settings To change the settings for a TV-out connection, select TV-Out and from the following: ● Default profile — Set the profile that you want activated each time you connect a Nokia Video Connectivity Cable to your device. ● TV screen size — Select the aspect ratio of the TV: Normal or Widescreen for widescreen TVs. ● TV system — Select the analogue video signal system that is compatible with your TV. ● Flicker filter — To improve image quality on the screen of your TV, select On.
Settings maintains a list of SIM cards that are recognised as the owner’s cards. ● Closed user group — You can specify a group of people to whom you can call and who can call you (network service). ● Confirm SIM services — You can set the device to display confirmation messages when you are using a SIM card service (network service). Certificate management Press , and select Tools > Settings > General > Security > Certificate management.
Change the trust settings Before changing any certificate settings, you must make sure that you really trust the owner of the certificate and that the certificate really belongs to the listed owner. Scroll to an authority certificate, and select Options > Trust settings. Depending on the certificate, a list of the applications that can use the selected certificate is shown.
Settings ● Network based — Use information from the cellular network (network service). Positioning server To define an access point, and positioning server for A-GPS, select Positioning server. The positioning server may be preset by your service provider, and you may not be able to edit the settings. Phone settings In phone settings, you can edit settings related to phone calls and network. Call settings Press Call.
Tip: To switch between the phone lines, press and hold # in the standby mode. ● Line change — To prevent line selection (network service), select Disable if supported by your SIM card. To change this setting, you need the PIN2 code. Call divert Press , and select Tools > Settings > Phone > Call divert. Call divert allows you to divert your incoming calls to your voice mailbox or another phone number. For details, contact your service provider.
Settings Internet call barring To select whether anonymous calls are allowed from the internet, set Anonymous call barring on or off. Network settings Press , and select Tools > Settings > Phone > Network. Your device can automatically switch between the GSM and UMTS networks. The GSM network is indicated with in the standby mode. The UMTS . network is indicated with 148 ● Network mode — Select which network to use.
You can also use a WLAN data connection. Only one connection in one wireless LAN can be active at a time, but several applications can use the same internet access point. indicates a protected access point. indicates a packet data access point. indicates a WLAN access point. Tip: You can create internet access points in a wireless LAN with the WLAN wizard. To establish a data connection, an access point is required.
Settings Follow the instructions from your service provider. ● Access point name — You obtain the access point name from your service provider. ● User name — The user name may be needed to make a data connection, and is usually provided by the service provider. ● Prompt password — If you must enter the password every time you log in to a server, or if you do not want to save your password in the device, select Yes.
To enter the settings for the selected security mode, select WLAN security settings. Security settings for WEP ● WEP key in use — Select the wired equivalent privacy (WEP) key number. You can create up to four WEP keys. The same settings must be entered on the WLAN access point device. ● Authentication type — Select Open or Shared for the authentication type between your device and the WLAN access point device.
Settings data network. Starting an active packet data connection (for example, to send and receive email) is quicker. If there is no packet data coverage, the device periodically tries to establish a packet data connection. If you select When needed, the device uses a packet data connection only if you start an application or action that needs it. ● Access point — The access point name is needed to use your device as a packet data modem to a compatible computer.
Press , and select Tools > Settings > Connection > APN control. With the access point name control service, you can restrict packet data connections and allow your device to use only certain packet data access points. Settings Access point name control This setting is only available if your SIM card supports the access point control service. To set the control service on or off or to change the allowed access points, select Options and the corresponding option.
Troubleshooting Troubleshooting To view frequently asked questions about your device, visit the product support pages at www.nseries.com/support . Q: What is my password for the lock, PIN, or PUK codes? A: The default lock code is 12345. If you forget or lose the lock code, contact a Nokia Care point or your service provider. If you forget or lose a PIN or PUK code, or if you have not received such a code, contact your network service provider.
Q: Why can’t the other device see the files stored on my device in the home network? A: Make sure that you have configured the home network settings, content sharing is turned on in your device, and the other device is UPnP compatible. Q: What can I do if my home network connection stops working? A: Switch off the wireless LAN (WLAN) connection from your compatible PC and your device, and switch it on again. If this does not help, restart your compatible PC and your device.
Troubleshooting 2. To increase the background scan time interval, adjust the time in Scan for networks. To stop background scans, select Show WLAN availability > Never. 3. To save your changes, press Back. When Scan for networks is set to Never, the WLAN availability icon is not shown in the standby mode. However, you can still manually scan for available WLAN networks, and connect to WLAN networks as usual.
A: You cannot use your device as a fax modem. However, with call diverting (network service), you can divert incoming fax calls to another phone number.
Battery information Battery information Charging and discharging Your device is powered by a rechargeable battery. The battery can be charged and discharged hundreds of times, but it will eventually wear out. When the talk and standby times are noticeably shorter than normal, replace the battery. Use only Nokia approved batteries, and recharge your battery only with Nokia approved chargers designated for this device.
Nokia battery authentication guidelines Always use original Nokia batteries for your safety. To check that you are getting an original Nokia battery, purchase it from an authorised Nokia dealer, and inspect the hologram label using the following steps: Successful completion of the steps is not a total assurance of the authenticity of the battery.
Battery information 160 To find out more about original Nokia batteries, visit www.nokia.com/battery.
Your device is a product of superior design and craftsmanship and should be treated with care. The following suggestions will help you protect your warranty coverage. ● Keep the device dry. Precipitation, humidity, and all types of liquids or moisture can contain minerals that will corrode electronic circuits. If your device does get wet, remove the battery, and allow the device to dry completely before replacing it. ● Do not use or store the device in dusty, dirty areas.
Care and maintenance 162 is not working properly, take it to the nearest authorized service facility for service. Disposal The crossed-out wheeled-bin symbol on your product, literature, or packaging reminds you that in the European Union all electrical and electronic products, batteries, and accumulators must be taken to separate collection at the end of their working life. Do not dispose of these products as unsorted municipal waste.
Small children Your device and its enhancements may contain small parts. Keep them out of the reach of small children. Operating environment This device meets RF exposure guidelines when used either in the normal use position against the ear or when positioned at least 1.5 centimeters (5/8 inch) away from the body. When a carry case, belt clip, or holder is used for body-worn operation, it should not contain metal and should position the device the above-stated distance from your body.
Additional safety information ● Always keep the wireless device more than 15.3 centimeters (6 inches) from the medical device when the wireless device is turned on. ● Not carry the wireless device in a breast pocket. ● Hold the wireless device to the ear opposite the medical device to minimize the potential for interference. ● Turn the wireless device off immediately if there is any reason to suspect that interference is taking place.
Switch off your device when in any area with a potentially explosive atmosphere, and obey all signs and instructions. Potentially explosive atmospheres include areas where you would normally be advised to turn off your vehicle engine. Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death. Switch off the device at refuelling points such as near gas pumps at service stations.
Additional safety information 166 an emergency call. Consult this guide or your service provider for more information. When making an emergency call, give all the necessary information as accurately as possible. Your wireless device may be the only means of communication at the scene of an accident. Do not end the call until given permission to do so. Certification information (SAR) This mobile device meets guidelines for exposure to radio waves. Your mobile device is a radio transmitter and receiver.
A access codes 16 access points 71, 149 accessories See enhancements activation keys 92 active standby mode 97, 142 active toolbar in camera 30 in gallery 43 address book See contacts alarm clock 98 alarm, calendar note 99 albums, media 43 anniversary notes 99 answering calls 115 application manager 134 applications 134 attachments 106, 107 audio messages 103 auto-update for time/ date 98 B backlight time-out 141 barcodes 132 battery power saver setting 141 saving power 17 birthday notes 99 blogs 65, 92
Index 168 self-timer 34 sequence mode 33 settings 37 video mode 36 video quality 39 cell broadcast messages 101 certificates 144 character encoding 103 charts, spreadsheet 130 clipboard, copying to 103 clock 97, 98 computer connections 76 See also data connections conference calls 115 configuration See settings connection manager 72 contact information 15 contacts copying 127 default information 127 deleting 126 editing 126 groups 128 images in 126 ringing tones 127 saving 126 sending 126 synchronising 139
J J2ME Java application support 134 Java scripts/ applications 134 K keyguard 23, 143 keypad 23, 143 L landmarks 60 language settings 142 light settings 141 list view of menus 97 location information 32, 53 lock code 16 locking keypad 23, 143 loudspeaker 27 M mailbox e-mail 106 video 115 voice 115 main menu 97 Maps 55 media Flash Player 92 music player 80 radio 85 RealPlayer 91 streaming 91 voice recorder 93 meeting notes 99 meetings, setting up 99 memo notes 99, 131 memory clearing 18 web cache 67
Index 170 P packet data connection access point settings 149 counters 124 settings 151 page overview 65 PDF reader 131 personal certificates 144 personalisation 95, 141 phonebook See contacts photographs See camera PictBridge 47 PIN code 16 PIN2 code 16 positioning information 53 positioning settings 145 power saver 141 PowerPoint, Microsoft 130 predictive text entry mode 102 presentations, multimedia 47, 106, 130 printing images 47 print basket 44 product support pages 15 profiles internet call profile
software update 16 songs 80 speaker phone 27 special characters, text entry 103 speed dialling 116 standby mode 97, 142 streaming media 91 support 15 Symbian applications 134 synchronisation of data 139 T templates, message 104 text entry 102 text messages receiving and reading 105 replying to 105 sending 103 settings 108 SIM messages 108 themes 95 time and date 98 time zone settings 98 time-out for backlight 141 tones ring settings 95, 96 settings 141 toolbar 30, 43 transferring data 20 transferring mus
Index W wallpaper 95 web connection 63 web logs 65, 92 week settings, calendar 99 welcome 20 welcome note 141 WEP 151 widgets 65 wireless LAN (WLAN) 70 wireless LAN settings 152 Word, Microsoft 130 world clock 98 WPA 151 Z zip manager 132 zooming 31, 37 172
