User Guide

New tools

The table below gives a short overview of service tools that can be used for testing, error analysis and repair

of product RM-313, refer to various concepts.

FS-65 Flash adapter

FS-65 has the following features:

• Provides galvanic connection to terminal test pads

• Provides standardized interface towards Control Unit

• Provides RF connection using galvanic connector or coupler

MJ-151 Module jig

MJ-151 is meant for troubleshooting, testing, tuning and flashing on

the engine level (CU-4 supported).

The jig includes an RF interface for GSM, WCDMA and Bluetooth.

RJ-189 Soldering jig

The jig is used for soldering and as a rework jig for the system module.

It is made of lead-free rework compatible material.

SA-106 RF coupler

SA-106 is an RF coupler for WCDMA and GSM RF testing. It is used

together with the product-specific flash adapter.

Reused tools

The table below gives a short overview of service tools that can be used for testing, error analysis and repair

of product RM-313, refer to various concepts.

RM-313

Service Tools and Service Concepts

Issue 1 COMPANY CONFIDENTIAL Page 2 –5