User Guide

4. Click Close to end the lights testing.

Switch imaging key lighting ON using Phoenix

Prerequisites

First go through steps 1-5 in Switching display lighting ON using Phoenix (page 3–49) if not done yet.

Steps

1. From Target partition, select SIDELED2.

2. From State partition, select On.

3. Set Level to 100 and click Write.

4. Click Close to end the lights testing.

Switching imaging key lighting OFF using Phoenix

Prerequisites

First go through steps 1-5 in Switching display lighting ON using Phoenix (page 3–49) if not done yet.

Steps

1. From Target partition, select SIDELED2.

2. From State partition, select Off.

3. Set Level to 0 and click Write.

RM-313

BB Troubleshooting and Tuning Guide

Page 3 –54 COMPANY CONFIDENTIAL Issue 1