User Guide

Note: It is not possible to switch S60 keyboard lighting ON if display lighting is not activated (all

other keyboard lights can be activated, although display lights would be OFF, but not S60 keyboard

lights).

Steps

1. From Target partition, select Keyboard.

2. From State partition, select On.

3. Set Level to 100 and click Write.

4. Click Close to end the lights testing.

Note: The S60 keyboard lighting brightness follows display lighting brightness value, i.e. it is not

possible to set different brightness for display and S60 keyboard lighting.

Switching S60 keyboard lighting OFF using Phoenix

Prerequisites

First go through steps 1-5 in Switching display lighting ON using Phoenix (page 3–49) if not done yet.

Steps

1. From Target partition, select Keyboard.

2. From State partition, select Off.

3. Set Level to 0 and click Write.

RM-313

BB Troubleshooting and Tuning Guide

Issue 1 COMPANY CONFIDENTIAL Page 3 –51