User Guide

5. Click the Lights sheet.

6. From Target partition, select Display.

7. From State partition, select On.

8. Set Level to 100 and click Write.

9. Click Close to end the lights testing.

Note: It is possible to set any value between 0…100 for display lights.

Switching display lighting OFF using Phoenix

Prerequisites

First, go through steps 1-5 in Switching display lighting ON using Phoenix (page 3–49), if not done yet

Steps

1. From Target partition, select Display.

2. From State partition, select Off.

3. Set Level to 0 and click Write.

4. Click Close to end the lights testing.

Switching S60 keyboard lighting ON using Phoenix

Prerequisites

First, go through steps 1-5 in Switching display lighting ON using Phoenix (page 3–49), if not done yet.

RM-313

BB Troubleshooting and Tuning Guide

Page 3 –50 COMPANY CONFIDENTIAL Issue 1