User Guide

WW Competence Transfer
CMO Operations & Logistics
Multimedia Creation & Support CONFIDENTIAL
27.3.2006
16
Service Manual N80 RM-91/RM-92
Copyright © 2006 NOKIA Corporation. All rights reserved.
Approved 1.0
DJK
Page (27)
33. Open snap 5. 34. Remove the KEYMAT BEZEL.
35. Remove the ITU KEYMAT. 36. Unscrew the Torx Plus
®
size 6 SCREWS in the order shown. For
assembly use the reverse order with a torque setting of 23Ncm.
Always use new SCREWS when re-assembling the unit.
37. Close the SLIDE ASSY. 38. Remove the UI FRAME SPARE include the ENGINE SHIELD ASSY.
39. Do not pull the SLIDE ASSY apart, unless replacement is
necessary.
40. Mind the correct assembling when connecting the FLEX I/CONN
MODULE to the ENGINE MODULE.
For assembly only!