User Guide

Bluetooth and FM radio self tests in Phoenix

Prerequisites

A flash adapter (or phone data cable) connected to a PC with Phoenix service software is required.

Steps

1. Place the phone in the flash adapter or connect data cable to phone.

2. Start

Phoenix

service software.

3. Choose File→Scan Product.

4. From the Mode drop-down menu, set mode to Local.

5. Choose Testing→Self Tests.

6. In the

Self Tests

window check the following Bluetooth and FM radio related tests:

• ST_LPRF_IF_TEST

• ST_LPRF_AUDIO_LINES_TEST

• ST_BT_WAKEUP_TEST

• ST_RADIO_TEST

7. To run the tests, click Start.

Figure 18 Bluetooth and FM radio self tests in

Phoenix

FM radio testing

Steps

1. Set signal generator parameters:

• FM modulation on

• Frequency 100MHz

RM-348; RM-349; RM-350

Baseband Troubleshooting

Issue 2 COMPANY CONFIDENTIAL Page 3 –43