User Guide

Signal
name
Regulator Sleep Idle Nominal
voltage
Main user Notes Supply
VRCP1 AVILMA OFF OFF 4.75 RF module RF
active
VBAT
VOUT BETTY ON ON 2,5 ALS VBAT
VAUD LP3985 3,0 DAC33 On
when
used
VBAT
VCAM_1V8 LM3677 OFF OFF 1,8 Camera HWA ,
LP5952
VBAT
VCORE_1V3 LP5952 OFF OFF 1,3 Camera HWA
core
VCAM_1V8
(LM3677)
VCAM_2V8 LP3985 OFF OFF 2,8 Cameras VBAT
VCORE TPS62350 ON ON 1,2 Rapido core VBAT
VIO LM3677 ON ON 1.8 VIO, VDRAM VBAT
VDDB SD
levelshift
er,
LP2939
OFF OFF 2,9 SD card ON
when
used
VBAT
LEDOUT TK65604 OFF Keyboard and
display
backlights
VBAT
FLASH LED+
FLASH LED-
ADP1653 OFF OFF 4,5/5,5 Camera flash VBAT
VBAT 3,6
VCAM_ACT LP3985 OFF OFF 3.0 Camera VBAT
VOut TK63128 OFF OFF 2.8 NCW VBAT
Backup battery troubleshooting
Verify that the backup battery G2200 is empty (U<1V). Switch the phone on. Measure voltage of the battery
when the main battery is connected to the phone and the phone is switched on. Wait a few minutes and
monitor that the backup battery voltage rises. Switch off the phone, disconnect the main battery and monitor
that the voltage of the backup battery decreases. Normal behaviour of the voltage is described in the figures
below:
RM-348; RM-349; RM-350
Baseband Troubleshooting
Issue 2 COMPANY CONFIDENTIAL Page 3 –7
Copyright © 2008 Nokia. All rights reserved.