User Guide

RJ-93 Rework jig

RJ-93 is a rework jig used when servicing the PW AMP module (N7520).

It is used together with rework stencil ST-40.

SA-131 RF coupler

SA-131 is a generic device for GPS testing. It is used together with

SS-62.

SA-136 RF coupler

SA-136 is an RF coupler for WCDMA and GSM RF testing. It is used

together with SS-46 and SS-62.

The following table shows attenuations from the antenna pads of the

mobile terminal to the SMA connectors of SA-136:

•

Frequency Att. (dB)

GSM850 TX Low: 4,7 Mid: 4,2 High: 4,1

GSM850 RX Low: 3,9 Mid: 3,8 High: 3,7

GSM900 TX Low: 3,9 Mid: 3,8 High: 3,9

GSM900 RX Low: 4,1 Mid: 4,9 High: 5,9

GSM1800 TX Low: 4,5 Mid: 4,4 High: 4,5

GSM1800 RX Low: 4,6 Mid: 4,8 High: 5,2

GSM1900 TX Low: 5,0 Mid: 5,2 High: 5,2

GSM1900 RX Low: 5,0 Mid: 4,7 High: 4,5

WCDMA850 TX Low: 4,5 Mid: 4,2 High: 4,1

WCDMA850 RX Low: 3,9 Mid: 3,9 High: 3,8

WCDMA1920 TX Low: 5,1 Mid: 4,8 High: 4,6

WCDMA1920 RX Low: 5,1 Mid: 5,0 High: 4,9

SS-100 Camera removal tool

The camera removal tool SS-100 is used to remove/attach a camera

module from/to the camera socket of the phone PWB.

RM-348; RM-349; RM-350

Service Tools and Service Concepts

Issue 2 COMPANY CONFIDENTIAL Page 2 –7