User Guide

Device Memories
Combo memory
The memory of the device consists of stacked DDR SDRAM and MuxedMassMemory (M3). Combo memory DDR/
M3 memory has 1 Gb DDR + 2Gb M3.
Audio Concept
Audio HW architecture
The functional core of the audio hardware is built around three ASICs: RAPIDOYAWE engine ASIC, mixed signal
ASIC Avilma and D/A converter DAC33.
DAC33 converts digital audio signal to analog and is routed to the FM Transmitter and amplifier TPA6130
which provides an interface for the transducers and the accessory connector.
Integrated handsfree stereo speakers are driven by a D-class audio amplifier TPA2012D2.
There are two audio transducers:
7x11 mm dynamic earpiece
Two 8X12 mm dynamic speakers
Avilma provides an output for the dynamic vibra component. All galvanic audio accessories are connected to
the AV accessory connector.
A Bluetooth audio and FM radio module, which is connected to the RAPIDOYAWE supports Bluetooth audio
and FM radio functionality.
Figure 66 Audio system block
Internal microphone
The internal microphone is used for HandPortable (HP) and Internal HandsFree (IHF) call modes.
RM-348; RM-349; RM-350
System Module and User Interface
Page 8 –20 COMPANY CONFIDENTIAL Issue 2
Copyright © 2008 Nokia. All rights reserved.