User Guide

Setting WCDMA2100 WCDMA900

Signal generator to antenna

connector

2140 MHz 942,4 MHz

Band I VIII

Steps

1. Via Phoenix Testing menu, choose WCDMA/RX Control.

2. In the RX control window, make the following settings:

3. Click Start to activate the settings.

If the settings are changed later on (for example, change of channel) you have to click Stop and Start

again.

Note: Clicking Stop also disables TX control if it was active.

4. Set the following RF generator settings:

Figure 26 WCDMA RX generator settings

RM-348; RM-349; RM-350

RF Troubleshooting

Page 4 –12 COMPANY CONFIDENTIAL Issue 2