User Guide

There are different options available for testing the Rx path. The simplest is to use the WLAN to report Rx

packets when operating in an area where there is an active WLAN network. Simply starting an Rx test will

show the number of packets detected by the WLAN module as it monitors the network. However, it does

require a properly configured WLAN network.

From the testing toolbar select WLAN Rx Test option shown below. This test can be used to verify Rx

configuration and functionality.

To start the test, select the Start option button.

As the WLAN monitors an active WLAN network, the Rx test results window will update and show the number

of Frames received, as well as the Packer error rate.

Monitoring the detected frames is a simple method to verify the WLAN antenna and receiver path is working

properly.

RM-348; RM-349; RM-350

Baseband Troubleshooting

Issue 2 COMPANY CONFIDENTIAL Page 3 –55