User Guide

In addition, a test of the WLAN to BTH interface can be done by selecting the

ST_BT_WLAN_COEXISTENCE_TEST check box and selecting Start button.

This test verifies that the WLAN to BTH co-existence interface signals are properly connected and there are

no open circuit or shorts on the four interface signals.

The co-existence interface comprises BTH Txconfig, BTH RF Active, BTH Priority, and BTH Frequency.

RM-348; RM-349; RM-350

Baseband Troubleshooting

Page 3 –52 COMPANY CONFIDENTIAL Issue 2