User Guide

Steps

1. For manual tuning, set mode to Local in the Operating Mode dropdown menu.

2. In the Tuning menu, choose WCDMA→Rx Calibration .

3. Click Start.

4. Select Band "WCDMA 2100".

5. Click Tune.

6. Setup the signal generator to correspond with the values on the,

Rx Calibration

pop-up window and click

OK.

Figure 62 Pop-up window for WCDMA2100

RM-135

Nokia Customer Care RF troubleshooting

Page 5 –42 COMPANY CONFIDENTIAL Issue 1