User’s Guide Nokia N72-5
0434 DECLARATION OF CONFORMITY Hereby, NOKIA CORPORATION, declares that this RM-180 product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. A copy of the Declaration of Conformity can be found at http:// www.nokia.com/phones/ declaration_of_conformity/ The crossed-out wheeled bin means that within the European Union the product must be taken to separate collection at the product end-of-life.
Contents For your safety...........................................8 Active standby mode.......................................................... 21 Get connected ......................................... 11 Make calls ................................................22 Your Nokia N72 ...................................... 12 Help .........................................................................................12 Tutorial ..........................................................................
Remove members from a group.............................. 30 Camera and Gallery .................................31 Camera................................................................................... 31 Take pictures................................................................. 31 Take pictures in a sequence ..................................... 32 You in the picture—self-timer ................................. 33 The flash.........................................................................
Outbox—messages waiting to be sent...........................60 View messages on a SIM card .........................................61 Messaging settings .............................................................61 Text messages...............................................................61 Multimedia messages.................................................62 E-mail..............................................................................63 Web service messages....................................
Chat................................................................................. 80 View and start conversations .................................. 81 IM contacts................................................................... 81 Manage IM groups...................................................... 81 Chat server settings.................................................... 81 Converter...............................................................................
Battery information.............................. 110 Additional safety information............. 114 Charging and discharging .............................................. 110 Nokia battery authentication guidelines................... 110 Index ...................................................... 117 Care and maintenance .........................
For your safety Read these simple guidelines. Not following them may be dangerous or illegal. Read the complete user guide for further information. SWITCH ON SAFELY Do not switch the device on when wireless phone use is prohibited or when it may cause interference or danger. ROAD SAFETY COMES FIRST Obey all local laws. Always keep your hands free to operate the vehicle while driving. Your first consideration while driving should be road safety. SWITCH OFF NEAR BLASTING Follow any restrictions.
guide for detailed safety instructions. Do not connect incompatible products. Network services EMERGENCY CALLS Ensure the phone function of the device is switched on and in service. Press the end key as many times as needed to clear the display and return to the start screen. Enter the emergency number, then press the call key. Give your location. Do not end the call until given permission to do so. To use the phone you must have service from a wireless service provider.
For availability and information on using SIM card services, contact your SIM card vendor. This may be the service provider, network operator, or other vendor. Enhancements, batteries, and chargers Always switch the device off, and disconnect the charger before removing the battery. Check the model number of any charger before use with this device.
Use your device on the 2G network. See ‘About your device’, p. 9. Get connected Get connected Use Bluetooth technology to transfer files and connect to compatible enhancements. See ‘Bluetooth connectivity’, p. 83. Use a compatible USB data cable, for instance the Nokia Connectivity Cable CA-53, to connect to compatible devices, such as printers and PCs. Use a compatible memory card to transfer data or back up information. See ‘Memory card tool’, p. 16.
Your Nokia N72 Your Nokia N72 Model number: Nokia N72-5 Help The tutorial gives you information about some of the features of your device. Your device has context-sensitive help. You can access the help from an application or from the main menu. To view the tutorial, insert the memory card into your device, press , and select My own > Tutorial and the section you want to view. When an application is open, to access help for the current view, select Options > Help.
or the camera capture Record video clips • To adjust video setup settings before recording video, press . • After recording a video clip, to send the video, press and select Via multimedia, Via e-mail, or Via Bluetooth. You cannot send video clips saved in the .mp4 format in a multimedia message. For more information, see ‘Messaging’, p. 51 and ‘Bluetooth connectivity’, p. 83. • To delete a video clip, press . Edit text and lists • To mark an item in a list, scroll to it, and press and at the same time.
Your Nokia N72 Clock Press , and select Clock. To set a new alarm, select Options > Set alarm. Enter the alarm time, and select OK. When the alarm is active, is shown. To turn off the alarm, select Stop. When the alarm tone sounds, select Snooze to stop the alarm for five minutes, after which it resumes. You can do this a maximum of five times. If the alarm time is reached while the device is switched off, the device switches itself on and starts sounding the alarm tone.
Volume and loudspeaker control To increase or decrease the volume level when you have an active call or are listening to a sound, press or . The built-in loudspeaker allows you to speak and listen from a short distance without having to hold the device to your ear. Sound applications use the loudspeaker by default. Warning: Do not hold the device near your ear when the loudspeaker is in use, because the volume may be extremely loud. File manager Many features of the device use memory to store data.
Your Nokia N72 View memory consumption To view what types of data you have in the device and how much memory the different data types consume, select Options > Memory details > Phone memory. Scroll down to Free memory to view the amount of free memory in the device. To view the amount of free memory on a memory card, if you have a compatible card inserted in the device, select Options > Memory details > Memory card. Scroll down to Free memory to view the amount of free memory on the memory card.
Press , and select Tools > Memory. You can use a compatible memory card as extra storage space. It is also good to regularly back up the information in the device memory to a memory card. The information can be restored to the device later. You cannot use the memory card if the door of the memory card slot is open. Some memory cards are supplied preformatted and others require formatting. Consult your retailer to find out if you must format the memory card before you can use it.
Personalise your device 18 Personalise your device Your service provider may have requested that certain features be disabled or not activated in your device. If so, they will not appear on your device menu. Your device may also have been specially configured for your network provider. This configuration may include changes in menu names, menu order, and icons. Contact your service provider for more information.
Offline profile The Offline profile lets you use the device without To set and customise the ringing tones, message alert tones, and other tones for different events, environments, or caller groups, press , and select Tools > Profiles. If the currently selected profile is other than General, the profile name is shown at the top of the display in the standby mode. To change the profile, press in the standby mode. Scroll to the profile you want to activate, and select OK.
Personalise your device Transfer content from another device You can copy contacts, calendar, images, video, and sound clips using Bluetooth connectivity, from a compatible Nokia Series 60 device. You can use your Nokia N72 without a SIM card. The offline profile is automatically activated when the device is switched on without a SIM card. This allows you to use the SIM card in another device.
To activate a theme, scroll to it, and select Options > Apply. To preview a theme, scroll to it, and select Options > Preview. To edit themes, scroll to a theme, and select Options > Edit to change the following options: Wallpaper—The image to be shown as a background image in the standby mode. Power saver—The power saver type on the display: date and time, or a text you have written yourself. See also ‘Display’, p. 95. Image in 'Go to'—The background image for the Go to application.
Make calls Make calls Calls Tip! To increase or decrease the volume during a call, press or . If you have set the volume to Mute, you cannot adjust the volume with the scroll key. To adjust the volume, select Unmute, and press or . 1 In the standby mode, enter the phone number, including the area code. Press to remove a number.
Speed dial a phone number To activate speed dialing, press , and select Tools > Settings > Call > Speed dialling > On. To assign a phone number to one of the speed dialing keys ( — ), press , and select Tools > Speed dial. Scroll to the key to which you want to assign the phone number, and select Options > Assign. is reserved for the voice mailbox. To call in the standby mode, press the speed dial key and . Voice dialing Your device supports enhanced voice commands.
Make calls 3 The device plays a synthesized voice tag for the recognized contact in the selected device language, and displays the name and number. After a time-out of 1.5 seconds, the device dials the number. If the recognized contact was not correct, select Next to view a list of other matches, or Quit to cancel voice dialing. If several numbers are saved under the name, the device selects the default number, if it has been set.
Replace—to end an active call and replace it by answering the waiting call. Send DTMF—to send DTMF tone strings (for example, a password). Enter the DTMF string or search for it in Contacts. To enter a wait character (w) or a pause character (p), press repeatedly. Select OK to send the tone. Tip! You can add DTMF tones to the Phone number or DTMF fields in a contact card. Log Recent calls Tip! When you see a note in the standby mode about missed calls, select Show to access the list of missed calls.
Make calls Packet data To check the amount of data sent and received during packet data connections, press , and select My own > Log > Packet data. For example, you may be charged for your packet data connections by the amount of data sent and received.
Make calls Packet data counter and connection timer: To view how much data, measured in kilobytes, is transferred and how long a certain packet data connection lasts, scroll to an incoming or outgoing event indicated by Pack., and select Options > View details.
Contacts (Phonebook) Contacts (Phonebook) Press , and select Contacts. In Contacts you can add a personal ringing tone or a thumbnail image to a contact card. You can also create contact groups, which allow you to send text messages or e-mail to many recipients at the same time. You can add received contact information (business cards) to contacts. See ‘Data and settings’, p. 57. Contact information can only be sent to or received from compatible devices.
an address and Assign. Tip! You can synchronise your contacts to a compatible PC with Nokia PC Suite. See the CD-ROM supplied with your device. 4 Select a number or an address you want to set as a default. Copy contacts If you have phone numbers stored on the SIM card, copy them to Contacts. Entries that are saved only on the SIM card are not shown in the contacts directory, and for incoming calls and messages, the device cannot match the number to the name.
Contacts (Phonebook) When fixed dialing is activated, calls may be possible to the official emergency number programmed into your device. 5 Scroll to a contact, and press Add ringing tones for contacts To rename a group, select Options > Rename, enter the new name, and select OK. When a contact or group member calls you, the device plays the chosen ringing tone (if the caller’s telephone number is sent with the call and your device recognises it).
Camera Your Nokia N72 has a high resolution camera on the back of the device that can be used to take still images and videos. To activate the camera, open the camera lens cover on the back of the device. The Camera application starts when the camera is activated, and you can see the view to be captured. In Camera, you can take pictures and record videos. To move between still image and video capture, select Options > Image mode or Video mode.
Camera and Gallery • The flash indicator (4) shows if the flash is set to Automatic ( ), On/ forced ( ), or Off ( ). • The resolution indicator (5) shows the selected image quality. See ‘Adjust still image camera settings’, p. 33. • The sequence mode indicator (6) shows that the sequence mode is active. See ‘Take pictures in a sequence’, p. 32. • The self-timer indicator (7) shows that the self-timer is activated. See ‘You in the picture—selftimer’, p. 33.
The pictures are automatically saved in Gallery. You in the picture—self-timer Use the self-timer to delay the taking of a picture so that you can include yourself in the picture. To set the self-timer delay, select Options > Activate self timer > 10 seconds, 20 seconds, or 30 seconds. To activate the self-timer, select Activate. The self-timer indicator ( ) blinks and the device beeps when the timer is running. The camera takes the picture after the selected delay has elapsed.
Camera and Gallery pixels in an image. The more pixels, the more detailed the picture is, and the more memory it consumes. Add to album—Select whether you want to save the image to a certain album in the gallery. If you select Yes, a list of available albums opens. White balance—Select the current lighting condition from the list. This allows the camera to reproduce colors more accurately. Extended zoom—Select On if you want to achieve maximum zoom but are prepared to accept lower image resolution.
)—Use this mode in low light conditions. Image modes Automatic ( ) (default)—Use this mode in all conditions. User defined ( )—Use this mode to create a personalized scene with your own flash, white balance, and color tone settings. Portrait ( )—Use this mode to take portrait pictures, such as head shots and sitting poses. Landscape ( )—Use this mode when you take pictures of objects that are further away. Night ( )—Use this mode in low light conditions.
Camera and Gallery • To zoom in or out, press and . Record videos To move between still image and video capture, select Options > Image mode or Video mode. Open the Video mode. To make lighting and color adjustments before recording a video, select Options > Video setup > Shooting mode, White balance, or Colour tone. See ‘Adjust color and lighting’, p. 34. To select a mode, select Options > Video setup > Shooting mode. See ‘Shooting modes’, p. 34. 1 Press to start recording. The record icon is shown.
Video settings There are two kinds of settings for the video recorder: Video setup settings and main settings. To adjust Video setup settings, see ‘Adjust color and lighting’, p. 34. The setup settings return to the default settings after you close the camera, but the main settings remain the same until you change them again. To change the main settings, select Options > Settings and from the following: Audio recording—Select On if you want to record both image and sound.
Camera and Gallery effects that you can add in the beginning and end of the video or between the video clips. In the video editor you can see two timelines: video clip timeline and sound clip timeline. If you add images, text, or transitions to a video clip, they are shown on the video clip timeline. To move on the timelines, scroll left or right. To switch between the timelines, scroll up or down.
Video clip—Inserts the selected video clip. A thumbnail of the video clip is shown in the main view. A thumbnail consists of the first non-black view of the video clip. The name and length of the selected video clip is also shown. Image—Inserts the selected image. A thumbnail of the image is shown in the main view. Text—Inserts text to the video clip. You can insert a title, subtitle, or credits. Sound clip—Inserts the selected sound clip.
Camera and Gallery Tip! To switch from Gallery to the camera, select Options > Go to Camera from the Images & video folder. Select Images & video , Tracks , Sound clips , Links , or All files , and press to open it. You can browse and open folders; and mark, copy, and move items to folders. Video clips, .ram files, and streaming links are opened and played in the RealPlayer application. See ‘RealPlayer’, p. 47. Music tracks are played and managed in the music player application. See ‘Music player’, p. 77.
Press (faster) or (slower) to adjust the Tempo. Press (previous) or (next) to browse the thumbnails. To add an image or a video clip to an album in the gallery, select Options > Add to album. See ‘Albums’, p. 41. To add sound to the slide show, select Options > Slide show > Music settings and from the following: • Music—Select On, or Off. • Track—Select a music file from the list. • Volume—Press to decrease the volume, or to increase the volume.
Camera and Gallery PrintOnline Note: The availability of this service may vary according to your country or sales area, and the service may only be available in a limited number of languages. With the PrintOnline application you can print images online, and order different products with the selected image, such as mugs or mouse pads. The available products depend on the service provider.
Online sharing Note: The availability of this service may vary according to your country or sales area, and the service may only be available in a limited number of languages. With the Online sharing application, you can share your images and videos in online albums, weblogs, or in other online sharing services on the Web. You can upload content, save unfinished posts as drafts and continue later, and view the content of the albums. The supported content types may vary depending on the service provider.
Camera and Gallery 44 To connect to the service and upload the files to the Web, select Options > Upload, or press . Open online service Online sharing settings To edit the Online sharing settings, in the Online sharing application, select Options > Settings. To view uploaded images and videos in the online service, and draft and sent entries in your device, in the Images & video folder, select Options > Online Services.
Display image size—to select the size in which the image is shown on the display of your device. This setting does not affect the upload image size. Display text size—to select the font size used to display text in draft and sent entries, or when you add or edit text to a new entry Advanced Camera and Gallery Application settings Service providers—to view or edit service provider settings, add a new service provider, or view details of a service provider.
Imaging Imaging Image print To print images with Image print, select the print option in the gallery, camera, image editor, or image viewer. Use Image print to print your images using a compatible USB data cable, Bluetooth connectivity, or a compatible memory card. You can only print images that are in .jpeg format. The pictures taken with the camera are automatically saved in .jpg format. If the default printer is not available, a list of available printing devices is displayed.
Press , and select Imaging > RealPlayer. With RealPlayer, you can play video clips, sound clips, and playlists, or stream media files over the air. You can activate a streaming link when you browse Web pages, or store it in the device memory or a compatible memory card. RealPlayer supports files with extensions such as .aac, .awb, .m4a, .mid, .mp3, and .wav. However, RealPlayer does not necessarily support all file formats or all the variations of file formats. For example, RealPlayer attempts to open all .
Imaging • To fast forward, press and hold . • To rewind through the media file, press and hold • To mute the sound, press and hold until is displayed. To turn on the sound, press and hold until you see . . Receive RealPlayer settings You may receive RealPlayer settings in a special text message from the network operator or service provider. See ‘Data and settings’, p. 57. For more information, contact your network operator or service provider.
Network settings: Default access point—Scroll to the access point you want to use to connect to the Internet, and press . Online time—Set the time for RealPlayer to disconnect from the network when you pause a media clip playing through a network link, select User defined, and press . Enter the time, and select OK. Lowest UDP port—Enter the lowest port number of the servers port range. The minimum value is 6970. Highest UDP port—Enter the highest port number of the servers port range.
Imaging After you select video clips and images, to define the order in which the files are played in the muvee, select Options > Advanced options. To select the file you want to move, press the scroll key. Then scroll to the file below which you want to place the marked file, and press the scroll key. To cut the video clips, select Options> Select contents. See ‘Select content’, p. 50. In Message you can add an opening and closing text to a muvee.
Press , and select Messaging. In Messaging, you can create, send, receive, view, edit, and organise text messages, multimedia messages, e-mail messages, and special text messages containing data. You can also receive messages and data through Bluetooth connectivity, receive Web service messages, cell broadcast messages, and send service commands. Note: Only devices that have compatible features can receive and display multimedia messages.
Messaging Write text • The most common punctuation marks are available under . Press repeatedly to reach the desired punctuation mark. Press to open a list of special characters. Use to move through the list, and select a character. • To insert a space, press . To move the cursor to the next line, press three times. • To switch between the different character modes, press . Traditional text input Predictive text input—dictionary conditions from your service provider.
Tip! To set predictive text input on or off, press twice quickly. Tips on predictive text input To erase a character, press more than one character. . Press and hold to clear To change between the different character modes, press . If you press quickly twice, predictive text input is turned off. Tip! Predictive text input tries to guess which commonly used punctuation mark (.,?!‘) is needed. The order and availability of the punctuation marks depend on the language of the dictionary.
Messaging input), Number mode, Cut (if text has been selected), Copy (if text has been selected), Paste (when text has been cut or copied first), Insert number, Insert symbol, and Writing language: (changes the input language for all editors in the device). Write compound words Write the first half of a compound word; to confirm it, press . Write the last part of the compound word. To complete the compound word, press to add a space.
3 4 5 6 7 To add an attachment to an e-mail, select Options > Insert > Image, Sound clip, Video clip, or Note. E-mail attachments are indicated by in the navigation bar. Tip! To send files other than sounds and notes as attachments, open the appropriate application, and select Options > Send > Via e-mail, if available. 8 To send the message, select Options > Send, or press . Your device supports the sending of text messages beyond the character limit for a single message.
Messaging mode is set to Guided or Free). See ‘Multimedia messages’, p. 62. Tip! When you send a multimedia message to an e-mail address or a device that supports the receiving of large images, use the larger image size. If you are not sure of the receiving device, or the network does not support sending large files, it is recommended that you use a smaller image size or a sound clip that is no longer than 15 seconds.
You may receive a notification that you have received a multimedia message that is saved in the multimedia message centre. To start a packet data connection to retrieve the message to your device, select Options > Retrieve. When you open a multimedia message ( ), you may see an image and a message, and simultaneously listen to a sound through the loudspeaker ( is shown if sound is included). Click the arrow in the icon to listen to the sound.
Messaging E-mail notification—Tells you how many new e-mails you have in your remote mailbox. An extended notification may list more detailed information. Tip! If you receive a vCard file that has a picture attached, the picture is saved to contacts. Web service messages Web service messages ( ) are notifications (for example, news headlines) and may contain a text message or a link. For availability and subscription, contact your service provider.
mailbox, select Options > Retrieve e-mail. New—to retrieve all new e-mail messages to your device. Selected—to retrieve only the e-mail messages that have been marked. All—to retrieve all messages from the mailbox. To stop retrieving messages, select Cancel. 2 After you retrieve the e-mail messages, you can continue viewing them online, or select Options > Disconnect to close the connection and view the e-mail messages offline.
Messaging the heading as well, you must first delete the e-mail message from your remote mailbox, and then make a connection from your device to the remote mailbox again to update the status. Tip! To copy an e-mail from the remote mailbox to a folder under My folders, select Options > Copy to folder, a folder from the list, and OK. To delete an e-mail from the device and the remote mailbox, select Options > Delete. In Delete msg. from:, select Phone and server.
Resend at (time)—The device will try to send the message again after a time-out period. Select Options > Send to restart the sending immediately. 4 Select a folder and OK to start copying. Open the folder to view the messages. Messaging settings Deferred—You can set documents to be on hold while they are in Outbox. Scroll to a message that is being sent, and select Options > Defer sending. Text messages Failed—The maximum number of sending attempts has been reached. Sending has failed.
Messaging Preferred connection—You can send text messages through the normal GSM network or through packet data, if supported by the network. See ‘Connection settings’, p. 96. Reply via same ctr.—Select Yes, if you want the reply message to be sent using the same text message centre number (network service). Add a new text message centre 1 Select Message centres > Options > New msg. centre.
Receive report—Select Yes if you want the status of the sent message to be shown in the log (network service). Receiving a delivery report of a multimedia message that has been sent to an e-mail address might not be possible. Deny report sending—Select Yes if you do not want your device to send delivery reports of received multimedia messages. Message validity—If the recipient of a message cannot be reached within the validity period, the message is removed from the multimedia messaging centre.
Messaging Password:—Enter your password. If you leave this field blank, you are prompted for the password when you try to connect to your remote mailbox. Retrieve (not shown if the e-mail protocol is set to IMAP4)—Define which parts of the e-mails are retrieved: Headers only, Partially (kB), or Msgs. & attachs.. Incoming mail server (Must be defined)—Enter the IP address or host name of the mail server that receives your e-mail.
Other settings Select Messaging > Options > Settings > Service message. Choose whether you want to receive service messages. If you want to set the device to automatically activate the browser and start a network connection to retrieve content when you receive a service message, select Download messages > Automatically. Select Messaging > Options > Settings > Other.
Radio Radio Press , and select Radio. You can use the application as a traditional FM radio with automatic tuning and saved stations, or with parallel visual information related to the radio program on the display, if you tune to stations that offer Visual Radio service. The Visual Radio service uses packet data (network service). You can listen to the FM radio while using other applications. To use the Visual Radio service, the following conditions are required: • The device must be switched on.
To adjust the volume, press or . To listen to the radio using the loudspeaker, select Options > Activate loudsp.. Warning: Listen to music at a moderate level. Continuous exposure to high volume may damage your hearing. Do not hold the device near your ear when the loudspeaker is in use, because the volume may be extremely loud. To view available stations based on location, select Options > Station directory (network service).
Radio Start-up tone—Select if a tone is played when the application is started. Auto-start service—Select Yes to have the Visual Radio service start automatically when you select a saved station that offers visual service. Access point—Select the access point used for the data connection. You do not need an access point to use the application as an ordinary FM radio. Current region—Select the region you are currently located in.
Shortcut: Press any key ( — ) in any calendar view. A meeting entry opens, and the characters you enter are added to the Subject field. Tip! Regularly back up the information on the device to a compatible memory card. You can restore the information, such as calendar entries, to the device later. See ‘Memory card tool’, p. 16. Create calendar entries 1 Press , and select Calendar > Options > New entry and from the following: Meeting—To remind you of an appointment that has a specific date and time.
Calendar multimedia, Via Bluetooth, or Via e-mail (available only if the correct e-mail settings are in place). Tip! You can move calendar and to-do data from many different Nokia phones to your device or synchronise your calendar and to-do notes to a compatible PC using Nokia PC Suite. See the CD-ROM supplied with your device. Set a calendar alarm You can set an alarm to remind you of meetings and anniversaries. 1 Open an entry in which you want to set an alarm, and select Alarm > On.
Web Various service providers maintain pages specifically designed for mobile devices. To access these pages, press , and select Web. These pages use the wireless markup language (WML), extensible hypertext markup language (XHTML), or hypertext markup language (HTML). Check the availability of services, pricing, and tariffs with your network operator or service provider. Service providers will also give you instructions on how to use their services.
Web Bookmarks view Glossary: A bookmark consists of an Internet address (mandatory), bookmark title, access point, and if the Web page requires, a user name and password. Your device may have some bookmarks loaded for sites not affiliated with Nokia. Nokia does not warrant or endorse these sites. If you choose to access them, you should take the same precautions, for security or content, as you would with any Internet site. 1 In the bookmarks view, select Options > Bookmark manager > Add bookmark.
To open a link, to check boxes, and make selections, press . If the security indicator is displayed during a connection, the data transmission between the device and the Internet gateway or server is encrypted. Shortcut: Use to jump to the end of a page and to the beginning of a page. The security icon does not indicate that the data transmission between the gateway and the content server (or place where the requested resource is stored) is secure.
Web You can download files that cannot be shown on the browser page, such as ringing tones, images, operator logos, themes, and video clips. Downloaded items are handled by the respective applications in your device, for example, a downloaded image is saved in Gallery. Copyright protections may prevent some images, music (including ringing tones), and other content from being copied, modified, transferred or forwarded.
Access point—To change the default access point, press to open a list of available access points. See ‘Connection settings’, p. 96. End a connection Load imgs. & sounds—Select Yes if you want to load images while browsing. If you select No, to load images later during browsing, select Options > Show images. Select Options > Advanced options > Disconnect to end the connection and view the browser page offline, or Options > Exit to end the connection and close the browser.
Web want external cascading style sheets to be downloaded, select By speed. Cookies—To enable or disable the receiving and sending of cookies. Glossary: Cookies are a means of content providers to identify users and their preferences for frequently used content. Java/ECMA script—To enable or disable the use of scripts. Security warnings—To hide or show security notifications. Serial no. sending—To enable or disable serial number sending.
Games Press , and select My own and a game. For instructions on how to play the game, select Options > Help. Music player Copy to memory card/Move to memory card or Copy to phone mem./Move to phone mem.. Files stored on the memory card are indicated with . My own My own Copyright protections may prevent some music (including ringing tones), and other content from being copied, modified, transferred or forwarded. Play music Press , and select My own > Music.
My own To search for songs in a song list, press the number keys to enter letters in the search box. To select several songs for playlists or deletion, press and hold while you press or . To delete songs, select them, and press . Deleting a song removes it permanently from the memory card and the device memory. Playlists The music player supports .m3u simple playlists. Copy playlists with music files, or create them in the music player.
Select Conversations to start or continue a conversation with an IM user; IM contacts to create, edit, or view the online status of your IM contacts; IM groups to start or continue a group conversation with multiple IM users; or Recorded chats to view a previous instant messaging session that you have saved. Note: Check the availability of chat services, pricing, and tariffs with your network operator and/or service provider. Service providers will also give you instructions on how to use their services.
My own Sort IM contacts—To sort your IM contacts Alphabetically or By online status. Availability reloading—To choose how to update information about whether your IM contacts are online or offline, select Automatic or Manual. Search for IM groups and users To search for groups, in the IM groups view, select Options > Search. You can search by Group name, Topic, and Members (user ID). To search for users, in the IM contacts view, select Options > New IM contact > Search from server.
. View and start conversations Go to the Conversations view to see a list of the individual conversation participants that you have an ongoing conversation with. To view a conversation, scroll to a participant, and press . To continue the conversation, write your message, and press . Glossary: The user ID is provided by the service provider to those who register to this service. To save a conversation participant to your IM contacts, scroll to the participant, and select Options > Add to IM contacts.
My own not know your user ID or password, contact your service provider. To change the IM server to which you wish to connect, select Default server. To add a new server to your list of IM servers, select Servers > Options > New server. Enter the following settings: Server name—Enter the name for the chat server. Access point in use—Select the access point you want to use for the server. Web address—Enter the URL address of the IM server. User ID—Enter your user ID. Password—Enter your login password.
Bluetooth connectivity You can connect wirelessly to other compatible devices with Bluetooth wireless technology. Compatible devices may include mobile phones, computers, and enhancements such as headsets and car kits. You can use Bluetooth wireless technology to send images, video clips, music and sound clips, and notes; to connect wirelessly to your compatible PC (for example, to transfer files); or to connect to a compatible printer to print images with Image print. See ‘Image print’, p. 46.
Connectivity Bluetooth connectivity settings Send data using Bluetooth connectivity Press , and select Connect. > Bluetooth. When you open the application for the first time, you are asked to define a name for your device. After you set Bluetooth connectivity on and change My phone's visibility to Shown to all, your device and this name can be seen by other users with devices using Bluetooth wireless technology. There can be several active Bluetooth connections at a time.
The Sent folder in Messaging does not store messages sent using Bluetooth connectivity. Tip! When searching for devices, some devices may show only the unique addresses (device addresses). To find the unique address of your device, enter the code *#2820# in the standby mode. Pair devices Glossary: Pairing means authentication. The users of the two devices with Bluetooth wireless technology should agree on a common passcode, and use the same passcode for both devices in order to pair them.
Connectivity status for your own devices, such as your compatible headset or PC, or devices that belong to someone you trust. indicates authorised devices in the paired devices view. Set as unauthorised—Connection requests from this device must be accepted separately every time. You can use your device with a variety of PC connectivity and data communications applications.
Tip! When using Nokia PC Suite for the first time, to connect your device to a compatible PC and to use Nokia PC Suite, use the Get Connected wizard available in Nokia PC Suite. See the CD-ROM supplied with your device. Connection manager You may have multiple data connections active at the same time when you are using your device in GSM networks. Press , and select Connect. > Conn. mgr.
Connectivity Speed—The current speed of both sending and receiving data in kilobytes per second. Dial-up—The dial-up number used. Name—Access point name used. Shared (not shown if the connection is not shared)—The number of applications using the same connection. Remote synchronisation Press , and select Connect. > Sync. Sync enables you to synchronise your notes, calendar, and contacts with various calendar and address book applications on a compatible computer or on the Internet.
Synchronise data In the Sync main view, you can see the different synchronisation profiles and the kind of data to be synchronised. 1 Select a synchronisation profile and Options > Synchronise. The status of the synchronisation is shown at the bottom of the screen. To cancel synchronisation before it finishes, select Cancel. 2 You are notified when the synchronisation is complete.
Connectivity Server profile settings Contact your service provider for the correct settings. Server name—Enter a name for the configuration server. Server ID—Enter the unique ID to identify the configuration server. Server password—Enter a password to identify your device to the server. Access point—Select an access point to be used when connecting to the server. Host address—Enter the URL address of the server. Port—Enter the port number of the server.
Calculator Office Office Converter To add, substract, multiply, divide, calculate square roots and percentages, press , and select Office > Calculator. To convert measures such as Length from one unit (Yards) to another (Metres), press , and select Office > Converter. Note: This calculator has limited accuracy and is designed for simple calculations. Note that Converter has limited accuracy, and rounding errors may occur. 1 Scroll to the Type field, and press to open a list of measures.
Office Set base currency and exchange rates Before you can make currency conversions, you need to choose a base currency and add exchange rates. The rate of the base currency is always 1. The base currency determines the conversion rates of the other currencies. 1 Select Converter > Options > Currency rates. A list of currencies opens, and you can see the current base currency at the top. Tip! To rename a currency, go to the currency rates view, scroll to the currency, and select Options > Rename currency.
Office Recorder Press , and select Office > Recorder to record telephone conversations and voice memos. If you are recording a telephone conversation, both parties hear a tone every 5 seconds during recording.
Tools Tools Settings To change settings, press , and select Tools > Settings. Scroll to a setting group, and press to open it. Scroll to a setting you want to change, and press . Phone settings General Phone language—Changing the language of the display texts in your device also affects the format used for date and time and the separators used, for example, in calculations. Automatic selects the language according to the information on your SIM card.
Right selection key—To assign a shortcut to the right selection key ( ) in the standby mode, select an application from the list. Active standby apps.—To select the application shortcuts you want to appear in the active standby. This setting is only available if Active standby is on.
Tools Speed dialling—Select On, and the numbers assigned to the speed dialing keys ( ) can be dialed by pressing and holding the key. See also ‘Speed dial a phone number’, p. 23. Anykey answer—Select On, and you can answer an incoming call by briefly pressing any keypad key, except , , , and . Line in use—This setting (network service) is shown only if the SIM card supports two subscriber numbers, that is, two phone lines. Select which phone line you want to use for making calls and sending text messages.
GSM network, packet data is available in the network. GSM network, packet data connection is active, data is being transferred. GSM network, multiple packet data connections are active. GSM network, packet data connection is on hold. (This can happen during a voice call, for example.) Receive access point settings You may receive access point settings in a text message from a service provider, or you may have preset access point settings in your device. See ‘Data and settings’, p. 57.
Tools Homepage—Depending on what you are setting up, write the Web address or the address of the multimedia messaging center. Packet data Select Options > Advanced settings to change the following settings: Packet data conn.—If you select When available and you are in a network that supports packet data, the device registers to the packet data network. Also, starting an active packet data connection is quicker (for example, to send and receive e-mail).
Security Phone and SIM PIN code request—When active, the code is requested each time the device is switched on. Deactivating the personal identification number (PIN) code request may not be allowed by some SIM cards. See ‘Glossary of PIN and lock codes’, p. 99. PIN code, PIN2 code, and Lock code—You can change the lock code, PIN code, and PIN2 code. These codes can only include the numbers from 0 to 9. See ‘Glossary of PIN and lock codes’, p. 99. To unlock the device, enter the lock code.
Tools code is blocked, and you need to unblock it before you can use the SIM card again. See the information about the PUK code in this section. In the certificate management main view, you can see a list of authority certificates that are stored in your device. Press to see a list of personal certificates, if available. PIN2 code—This code (4 to 8 digits) is supplied with some SIM cards, and is required to access some functions in your device.
To check certificate details, scroll to a certificate, and select Options > Certificate details. When you open certificate details, the validity of the certificate is checked, and one of the following notes may be displayed: • Certificate not trusted—You have not set any application to use the certificate. See ‘Change the trust settings’, p. 101. • Expired certificate—The period of validity has ended for the selected certificate.
Tools Call barring and call diverting cannot be active at the same time. Call barring Call barring (network service) allows you to restrict the calls that you make or receive with the device. To change the settings, you need the barring password from your service provider. Select the desired barring option, and set it on (Activate) or off (Cancel), or check whether the option is active (Check status). Call barring affects all calls, including data calls.
Voice commands You can use voice commands to control your device. For more information about the enhanced voice commands supported by your device, see ‘Voice dialing’, p. 23. To activate enhanced voice commands for starting applications or profiles, you must open the Voice com. application and its Profiles folder. Press , and select Tools > Voice com. > Profiles; the device creates voice tags for the applications and profiles. To use enhanced voice commands, press and hold and say a voice command.
Tools Example: If you have received the installation file as an e-mail attachment, go to your mailbox, open the e-mail, open the attachments view, scroll to the installation file, and press to start installation. Install applications and software Tip! You can also use Nokia Application Installer available in Nokia PC Suite to install applications. See the CD-ROM supplied with your device. Application icons are as follows: .
To start a network connection and to view extra information about the application, scroll to it, and select Options > Go to web address, if available. Application settings Select Options > Settings and from the following: Software installation—Select if Symbian software can be installed: On, Signed only, or Off. To see what software packages have been installed or removed and when, select Options > View log. Online certif. check—Select to check the online certificates before installing an application.
Tools • Valid keys ( ) are connected to one or more media files. • With expired keys ( ), you have no time to use the media file, or the time period for using the file is exceeded. To view the Expired activation keys, press . To buy more usage time or extend the usage period for a media file, select an activation key and Options > Activate content. Activation keys cannot be updated if Web service message reception is disabled. See ‘Web service messages’, p. 65.
Q&A Bluetooth connectivity Q: Why can’t I find my friend’s device? A: Check that both devices have activated Bluetooth connectivity. Check that the distance between the two devices is not over 10 metres (32 feet) and that there are no walls or other obstructions between the devices. Check that the other device is not in hidden mode. Check that both devices are compatible.
Troubleshooting in the contacts directory. To copy contacts from the SIM card to Contacts, see ‘Copy contacts’, p. 29. Camera Q: Why do images look smudgy? A: Ensure that the camera lens protection window is clean. Calendar Q: Why are the week numbers missing? A: If you have changed the calendar settings so that the week starts on a day other than Monday, the week numbers are not shown. Browser services Q: What do I do if the following message is displayed: No valid access point defined.
Q: Why do missing, discoloured, or bright dots appear on the screen every time I turn on my device? A: This is a characteristic of this type of display. Some displays may contain pixels or dots that remain on or off. This is normal, not a fault. Memory low • Send images to your e-mail address, and then save the images to your computer. • Send data using Bluetooth connectivity to a compatible device. • Store data on a compatible memory card.
Battery information Battery information Charging and discharging Your device is powered by a rechargeable battery. The battery can be charged and discharged hundreds of times, but it will eventually wear out. When the talk and standby times are noticeably shorter than normal, replace the battery. Use only Nokia approved batteries, and recharge your battery only with Nokia approved chargers designated for this device.
Authenticate hologram 1 When looking at the hologram on the label, you should see the Nokia connecting hands symbol from one angle and the Nokia Original Enhancements logo when looking from another angle. 2 When you angle the hologram left, right, down, and up, you should see 1, 2, 3, and 4 dots on each side respectively. 3 Scratch the side of the label to reveal a 20-digit code, for example, 12345678919876543210. Turn the battery so that the numbers are facing upwards.
Battery information 112 its enhancements. It may also invalidate any approval or warranty applying to the device. To find out more about original Nokia batteries, visit www.nokia.com/battery.
Your device is a product of superior design and craftsmanship and should be treated with care. The suggestions below will help you protect your warranty coverage. • Keep the device dry. Precipitation, humidity, and all types of liquids or moisture can contain minerals that will corrode electronic circuits. If your device does get wet, remove the battery, and allow the device to dry completely before replacing it. • Do not use or store the device in dusty, dirty areas.
Additional safety information Additional safety information Your device and its enhancements may contain small parts. Keep them out of the reach of small children. Operating environment Remember to follow any special regulations in force in any area, and always switch off your device when its use is prohibited or when it may cause interference or danger. Use the device only in its normal operating positions.
of the aircraft, disrupt the wireless telephone network, and may be illegal. Potentially explosive environments Vehicles RF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles such as electronic fuel injection systems, electronic antiskid (antilock) braking systems, electronic speed control systems, and air bag systems. For more information, check with the manufacturer, or its representative, of your vehicle or any equipment that has been added.
Additional safety information To make an emergency call: 1 If the device is not on, switch it on. Check for adequate signal strength. Some networks may require that a valid SIM card is properly inserted in the device. 2 Press the end key as many times as needed to clear the display and ready the device for calls. 3 Enter the official emergency number for your present location. Emergency numbers vary by location. 4 Press the call key.
Index Index A access points 96 settings 97 activation keys 105 adding text 39 alarms alarm clock 14 calendar 70 applications installing 104 applications, Java 103 B backing up 16 Bluetooth 83 connecting two devices, pairing 85 device address 85 factory set passcode 85 headset 102 pairing 85 passcode, glossary explanation 85 security 84 switching off 86 bookmarks 72 brightness display 95 setting in camera 36 C cache, clearing 75 calendar alarm 69 creating entries 69 synchronising PC Suite 70 call registe
Index connection settings 96 contact cards storing DTMF tones 25 contacts 28 inserting images 28 sending 28 copying contacts between the SIM card and device memory 29 text 54 copyright protection see activation keys cutting text 54 D data connections details 87 ending 87 date 14 digital rights management, DRM see activation keys DNS, domain name service, glossary explanation 98 E editing videos adding effects 37 adding sound clips 37 adding transitions 37 118 custom video clips 37 e-mail 54 automatic r
mailbox 58 automatic retrieving 59 media files fast forward 47 file formats 47 mute sound 47 rewind 47 memory clearing memory 16, 25 viewing memory consumption 16 memory card 16 menu, rearranging 18 messaging e-mail 54 multimedia messages 54 text messages 54 modes image modes 35 video modes 34 movies, muvees custom muvees 49 quick muvees 49 multimedia messages 54 music player 77 mute sound 47 P packet data connections 87 GPRS, glossary explanation 96 settings 98 pasting text 54 PC connections via Bluetoot
Index shortcuts 12 SIM card copying names and numbers to device 29 messages 61 names and numbers 29 sis file 103 SMS centre, short message service centre 62 snooze 14 software transferring a file to your device 103 sound clips 40 sounds muting a ringing tone 24 recording sounds 93 speed dialling 23 standby mode 18 synchronisation 88 T text message service centre adding new 62 text messages 54 themes 20 time 14 transferring content from another device 20 120 U USB cable 86 USSD commands 51 V video clips
