User Guide

Training & Vendor Development
CMO Operations & Logistics
Multimedia Creation & Support CONFIDENTIAL
28.Jul.2006
21
Service Manual N71 RM-67
Copyright © 2006 NOKIA Corporation. All rights reserved.
Approved 3.0
DJK/MGR
Page
(34)
9. Position the IHF SHIELD exactly between D-COVER and the D-
COVER IHF LID as shown.
10. Very carefully, fix it into place. Do not bend the IHF SHIELD.
11. Assemble the SD DOOR (only when using a new D-COVER). 12. Press the SD DOOR into place.
13. Check the right position of the IR WINDOW. 14. Open the SD DOOR and place the ENGINE BOARD into the D-
COVER.
15. To prevent damaging the plastic thread, turn the SCREW
slightly left first. Then tighten it with a torque setting of 17Ncm.
16. Fit the C-COVER SLIDE.