Nokia Play 360° Wireless Speaker MD-50W Issue 1.
About your speaker With the Nokia Play 360° wireless speaker, you can listen to music from your compatible device, such as a phone or music player, and enjoy high-quality audio. A single speaker fills your room with music, and you can connect a second Nokia Play 360° wireless speaker for stereo sound. You can connect to another device on the go, without stopping the music playing. The speaker also has a standard 3.5 mm audio connector. Read this user guide carefully before using the product.
2 3 4 5 6 7 8 9 Volume keys Bluetooth status indicator Bluetooth key Battery status indicator Charger connector Power key Battery cover fixing screw 3.5 mm audio input connector Charge the battery Before using the speaker, you must charge the battery. When the battery level of the speaker is low, the battery indicator light flashes. When the battery is charging, the light stays on. After the battery has fully charged, the light switches off. 1 2 3 Connect the charger to a wall outlet.
If the speaker is not connected, standby mode is activated, and the Bluetooth status indicator light turns white. If the speaker is not connected to a device within 30 minutes, the speaker switches off. Pair your device Pair and connect Before using your speaker with a compatible device, such as a phone, for the first time, you must pair and connect it to the device. You can pair your speaker with up to 8 devices, but with only 2 speakers at a time.
3 4 5 Within 3 minutes, activate Bluetooth on the compatible device, and set it to search for compatible devices. Select the speaker from the list of found devices. If required, enter the passcode 0000. Pair with another speaker Want to enjoy your music in stereo? Pair your speaker with another Nokia Play 360° wireless speaker for true stereo sound. Switch the speakers off, and press and hold the power key for 5 seconds on both speakers.
Connect to another device on the go Take turns with your friends in playing your favourite music. You can change the connected device on the go, without pausing the music. 1 2 3 While playing music from your connected device, press and hold for 3 seconds. Pair and connect with another device. The music continues to play until the pairing is completed. Play music on the newly connected device. Tip: To change the connection to the next device on the paired devices list on your speaker, press .
• • • • • • • • • • Keep the device dry. Precipitation, humidity, and all types of liquids or moisture can contain minerals that corrode electronic circuits. If your device gets wet, remove the battery, and allow the device to dry. Do not use or store the device in dusty or dirty areas. Moving parts and electronic components can be damaged. Do not store the device in high temperatures. High temperatures can shorten the life of the device, damage the battery, and warp or melt plastics.
The contents of this document are provided "as is". Except as required by applicable law, no warranties of any kind, either express or implied, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose, are made in relation to the accuracy, reliability or contents of this document. Nokia reserves the right to revise this document or withdraw it at any time without prior notice.