Nokia Luna with Wireless Charging (BH-220) User Guide Issue 1.
Introduction About your headset With the Nokia Luna Bluetooth Headset, you can handle calls hands-free, even when you are using two phones at the same time. Remove the headset from the cradle, and it's instantly ready for use. The surface of this product is nickel-free. Warning: This product may contain small parts. Keep them out of the reach of small children. Parts of the product are magnetic. Metallic materials may be attracted to the product.
This device is compliant with Bluetooth Specification 2.1 + EDR supporting the following profiles: Headset Profile 1.1 and Hands-Free Profile 1.5 . Check with the manufacturers of other devices to determine their compatibility with this device. About Qi Qi is a global standard that makes wireless charging possible for your device. With a Qi-compatible device, you don't need to connect any cables. You just place your device on the charging surface.
2 3 4 5 6 7 8 9 10 Earpiece Charging indicator light Cradle Charger connector Wireless charging area Bluetooth indicator light Multifunction key NFC area Carrying case Charge the battery Before using the headset, you must charge the battery. Warning: Use only chargers approved by Nokia for use with this particular model. The use of any other types may invalidate any approval or warranty, and may be dangerous. Use of unapproved chargers may present a risk of fire, explosion, or other hazard.
Switch the headset on or off Switch on Press the headset down to remove it from the cradle. The headset switches on, and a green indicator light flashes once. The headset connects to the last connected phone. If you have never paired the headset with a phone, or you have cleared the pairings, pairing mode is activated. Switch off Place the headset in the cradle, and press down on the headset to lock it into place. The headset switches off, and a red indicator light flashes once.
Pair and connect the headset using NFC With Near Field Communication (NFC), you can pair and connect your headset to your compatible phone easily. If the compatible phone supports NFC, activate its NFC feature, remove the headset from the cradle, and touch the NFC area of the cradle with the NFC area of your phone. The headset connects to the phone automatically. You can also disconnect the headset using NFC. For details on NFC, see the user guide of the phone.
1 2 3 4 Make sure Bluetooth is activated on both phones. To switch the headset off, press and hold the multifunction key for 5 seconds. Press and hold the multifunction key for 5 seconds to activate pairing mode, and pair the headset with the second phone. Switch the headset off and back on. The headset connects to both phones. Make calls Make and receive calls To make and receive calls using your headset, you need to connect it to your phone.
End an ongoing call, and answer a call on another phone Press the multifunction key. Put an ongoing call on hold, and answer a call on another phone Press and hold the multifunction key for 2 seconds. Switch between active and held calls Press and hold the multifunction key for 2 seconds. End an ongoing call, and activate a held call Press the multifunction key. If you redial or use voice dialing, the call is made on the phone you last had an active call on with the headset.
2 3 Press and hold the multifunction key for 9 seconds. The headset beeps twice, and the red and green indicator lights alternate. When the headset switches on, pairing mode is activated. Follow the voice prompts. Product and safety information Battery and charger information This device has an internal, nonremovable, rechargeable battery. Do not attempt to remove the battery from the device as you may damage the device.
• Only use a soft, clean, dry cloth to clean the surface of the device. Recycle Always return your used electronic products, batteries, and packaging materials to dedicated collection points. This way you help prevent uncontrolled garbage disposal and promote the recycling of materials.
/Issue 1.
