User’s Guide for the Wireless Headset (HDW-3) 9233095 Issue 1
DECLARATION OF CONFORMITY We, NOKIA CORPORATION declare under our sole responsibility that the product HDW-3 is in conformity with the provisions of the following Council Directive: 1999/5/EC. A copy of the Declaration of Conformity can be found from http://www.nokia.com/phones/declaration_of_conformity/. Copyright © 2004 Nokia. All rights reserved.
Contents 1. Introduction ...................................................................................................... 5 Bluetooth wireless technology ............................................................................................................... 5 Chargers and batteries.............................................................................................................................. 6 The card in the sales package .........................................................
Disconnecting the headset from the phone ..................................................................................... 20 Reconnecting the paired headset to your phone......................................................................... 20 Using the headset with several phones ............................................................................................. 21 Using the headset with several paired phones.............................................................................
1. Introduction The Wireless Headset HDW-3 can be connected without wires to a compatible phone that supports Bluetooth wireless technology. This gives you complete freedom for making and receiving calls while on the move or at the office. Read this user’s guide carefully before using the headset. More detailed information is provided by your phone's own user's guide.
The headset provides the best performance when it is used with a compatible Nokia phone. If you use the headset with a phone produced by another manufacturer, all the functions described in this user’s guide may not be available. In some countries, there may be restrictions on using Bluetooth devices. Check with your local authorities. ■ Chargers and batteries Check the model number of any charger before use with this device.
2. Getting started ■ Overview The headset contains the following parts: 1 - Power key: Switches the headset on and off. 2 - Answer/end key: Answers or ends the call. This key can also be used for voice dialling, redialling and switching an active call between the headset and the phone. 3 - Indicator light: Displays the current status of the headset. 4 - Volume up: Increases the earphone volume during a call. Copyright ©2004 Nokia Mobile Phones. All rights reserved.
5 - Volume down: Decreases the earphone volume during a call. 6 - Earphone: Relays the caller’s voice. 7 - Microphone: Picks up your voice. 8 - Charger connector 9 - Battery door 10 - Earloop ■ Charging the battery The headset has a rechargeable NiMH battery (part number 0774291). If you need to replace the battery, you can purchase a new one from your nearest authorised dealer. To charge the battery: Copyright ©2004 Nokia Mobile Phones. All rights reserved.
1. Connect the charger cable to the headset. For a list of compatible chargers, see Chargers and batteries on page 6. 2. Connect the charger to an AC wall outlet. The red indicator light is displayed during charging. Charging the battery fully takes between 1 and 2 hours, depending on the charger. 3. When the battery is fully charged, the green indicator light is shown. Disconnect the charger from the AC wall outlet and the headset.
■ Changing the battery When the operating time is noticeably shorter than normal, it is time to buy a new battery. To change the battery: 1. Open the battery door by gently sliding it backwards (1). 2. Remove the battery by pulling the strap (2). Copyright ©2004 Nokia Mobile Phones. All rights reserved.
3. Detach the battery from the connector (3). 4. Attach the new battery to the connector. 5. Place the connector in the space reserved for it and set the battery into its place (4). 6. Close the battery door and make sure it is properly locked in place (5). Copyright ©2004 Nokia Mobile Phones. All rights reserved.
■ Switching the headset on or off To switch on: Press and hold the power key for 2 seconds. The headset beeps and the green indicator light starts blinking fast. The blinking continues slower after the headset is connected to your phone. To switch off: Press and hold the power key for 2 seconds. The headset beeps and the red indicator light is displayed briefly. ■ Taking the headset into use for the first time 1. Make sure that your phone is switched on. 2. Switch on the headset. 3.
Once you have entered the passcode, your phone becomes the default phone for the headset, if the headset has not been previously paired with another phone. See also Using the headset with several phones on page 21. The headset beeps and appears in the phone menu where you can view the Bluetooth devices that are currently paired with your phone. 7. Start using the headset (see page 17). ■ Adjusting the headset to your ear The headset can be worn on either ear.
the earloop. L stands for the left ear, and R stands for the right ear. When, for example, the R marking is visible, you can wear the headset on your right ear. Copyright ©2004 Nokia Mobile Phones. All rights reserved.
■ Placing the headset on the ear Slide the earloop gently behind your ear as shown in the figure below: ■ Troubleshooting If you cannot connect the headset to your phone, proceed as follows: • Make sure that the headset is switched on and paired with your phone. • Make sure that the Bluetooth feature is activated on your phone.
• If the headset does not respond to your actions, remove the battery for a short while. Copyright ©2004 Nokia Mobile Phones. All rights reserved.
3. Using the headset Before using the headset, make sure that: • The headset is paired and connected to your phone. For instructions on pairing the headset, see Taking the headset into use for the first time on page 12. For instructions on connecting the headset, see Connecting the paired headset to your phone below. • The Bluetooth feature is activated in your phone. See the user’s guide of your phone. • The headset is switched on. See Switching the headset on or off on page 12.
Note that switching on the headset creates the connection automatically only if you have set the phone to accept Bluetooth connection requests without your permission. In Nokia phones this can be done by changing your paired devices settings in the Bluetooth menu. For more information on disconnecting the headset from your phone, see page 20. ■ Making a call When the headset is connected to your phone, make the call by using your phone in the normal way.
You can also answer the call by using your phone in the normal way. When you receive a call, you hear a ringing tone selected on your phone also through the headset. ■ Ending a call Press the answer/end key to end the currently active call. You can also end the call by using your phone in the normal way. ■ Rejecting a call If you do not want to answer a call, briefly press the answer/end key twice.
To switch the call from headset to phone: • Press and hold the answer/end key. OR: • Use the respective function in your phone. To switch the call from phone to headset: • Press and hold the answer/end key. OR: • Use the respective function in your phone. ■ Disconnecting the headset from the phone You can disconnect the headset from your phone when, for example, you want to use another Bluetooth device with your phone. The headset can be disconnected in the following ways: • Switch off the headset.
■ Using the headset with several phones Before the headset can be used with your phone, the phone has to be paired with the headset. The headset can be paired with up to 8 phones but connected to only one phone at a time. Using the headset with several paired phones The phone that was first paired with the headset is called the "default phone". The phone that was last used with the headset is called the "last used phone".
To reset the headset: Press and hold the power key together with the volume up key for 10 seconds. After the headset has been reset, the headset beeps twice and the red and green indicator lights alternate for several seconds. Copyright ©2004 Nokia Mobile Phones. All rights reserved.
4. Battery information Your headset is powered by a rechargeable battery. Take good care of the battery and follow the guidelines below. Charging and discharging • The full performance of a new battery is achieved only after two or three complete charge and discharge cycles. • The battery can be charged and discharged hundreds of times but it will eventually wear out. When the operating time is noticeably shorter than normal, buy a new battery.
may not work temporarily, even when the battery is fully charged. Battery performance is particularly limited in temperatures well below freezing. • Warning: Use only approved batteries (Nokia battery part number 0774291). Non-approved batteries may explode. Do not dispose of batteries in a fire! Dispose of batteries according to local regulations. Please recycle when possible. Do not dispose as household waste. Copyright ©2004 Nokia Mobile Phones. All rights reserved.
Care and maintenance Your headset is a product of superior design and craftsmanship and should be treated with care. The suggestions below will help you protect your warranty coverage. • Keep all accessories and enhancements out of the reach of small children. • Keep the headset dry. Precipitation, humidity and all types of liquids or moisture can contain minerals that will corrode electronic circuits.
harmful interference; and2. This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15.19 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
