User Guide

PKD-1 SW security device

SW security device is a piece of hardware enabling the use of the

service software when connected to the parallel (LPT) port of the PC.

Without the device, it is not possible to use the service software.

Printer or any such device can be connected to the PC through the

device if needed.

RJ-150 Soldering jig

RJ-150 is a soldering jig used for soldering and as a rework jig for the

engine module.

SA-125 RF coupler

SA-125 is an RF coupler for WCDMA and GSM RF testing. It is used

together with the product-specific flash adapter.

SA-131 RF coupler

SA-131 is a generic device for GPS testing.

SB-6 Bluetooth tester

The SB-6 test box is a generic device to perform Bluetooth bit error

rate testing and doing cordless FBUS connection via Bluetooth.

RA-6

Service Tools and Service Concepts

Issue 1 COMPANY CONFIDENTIAL Page 2 –9