User Guide

Camera characteristics

Main camera characteristics

Sensor type CMOS

Sensor photo detectors 5.0 million (2592 x 1944 pixels)

F number/Aperture f/2.8

Focal length 5.6/35 mm (35 mm equal)

Focus range 10 cm to infinity

Still Image resolutions up to 5 Megapixel: 2592x1944

Still images file format EXIF (JPEG), *.jpg

Video resolutions VGA 640 x 480 at 30 fps/15 fps

320 x 240 (QVGA) at 30/15 fps

176 x 144 at 15 fps (QCIF)

Video clip length Maximal clip length is 60 mins (High or Normal quality)

or limited to MMS size approx. 30 seconds (Sharing

quality)

Note: Clip length is dependable on available

memory

Video file format .mp4 (default) and .3gp (for MMS)

Auto exposure Center weighted AE

White balance Automatic, sunny, cloudy, incandescent, flurescent

Colour tones Normal, sepia, vivid, black&white, negative

Capture Modes Still capture mode, video mode and sequence mode

Selftimer 2, 10, or 20 secs

Flash settings Auto, off, forced, anti red-eye

Automatic image rotation On / Off

Flash LED

The device back camera has a flash LED (FLED) located directly beside the camera, providing better lighting

conditions in darker environments. The same LED is also used as an indicator light to indicate video clip

recording, and to indicate when pictures are being taken as a privacy indicator.

The connections between the main PWB and the FLED are implemented with a pair of “pogo” pins shown as

X6501 on the schematic.

The FLED has four white LEDs connected in series in one module. The module also includes a lens with its

plastic housing to ensure a proper light pattern at the target.

The dimensions of the FLED are 6.5 x 7.5 x 3.5 mm.

RA-6

System Module

Page 6 –16 COMPANY CONFIDENTIAL Issue 1