User Guide

3. Click Start to activate the settings.

If the settings are changed later on (for example, change of channel) you have to click Stop and Start

again.

Note: Clicking Stop also disables TX control if it was active.

WCDMA RSSI measurement

Prerequisites

WCDMA RX must be activated before RSSI can be measured. For instructions, please refer to WCDMA RX chain

activation (page 4–9).

Steps

1. From the Phoenix testing menu, select WCDMA→RX Power measurement

2. In the RX Power measurement window, select:

• Mode: RSSI

• Continuous mode

RA-6

RF troubleshooting

Page 4 –10 COMPANY CONFIDENTIAL Issue 1