User Guide

Note: You may alternately use a known good FM radio broadcast as a test signal.

2. Attach the Nokia headset to the phone’s AV connector.

3. Use Scroll button to autotune to the radio frequency.

4. Set volume to suitable level.

5. Check audio quality with a headset.

GPS Troubleshooting

GPS components

The GPS componets are located under the RF can, beside the AV-headset connector. There is no need to

remove RF can to perform the tests.

GPS Settings for Phoenix

GPS control

Prerequisites

A flash adapter with RF coupler connected to a PC with Phoenix service software is required. The GPS signal

should be connected to the RF coupler. The signal level will be high (approx from -45 dBm to -60 dBm) because

it is a leakage connection. If possible, calibrate the signal level with a known good phone.

Context

Use the following to test GPS using Phoenix.

Steps

1. Place phone to Flash Adaptor.

2. Start Phoenix service software.

3. From the File menu, select Scan Product and check that the correct product is displayed.

RM-412; RM-413

BB Troubleshooting

Issue 1 COMPANY CONFIDENTIAL Page 3 –51