User Guide

Steps

1. Place the phone in the flash adapter or connect data cable to phone.

2. Start

Phoenix

service software.

3. Choose File→Scan Product.

4. From the Mode drop-down menu, set mode to Local.

5. Choose Testing→Self Tests.

6. In the

Self Tests

window check the following Bluetooth and FM radio related tests:

•

ST_LPRF_IF_TEST

•

ST_LPRF_AUDIO_LINES_TEST

•

ST_BT_WAKEUP_TEST

•

ST_RADIO_TEST

7. To run the tests, click Start.

Figure 19 Bluetooth and FM radio self tests in

Phoenix

FM radio testing

Steps

1. Set signal generator parameters:

•

FM modulation on

•

Frequency 100MHz

•

FM deviation 22kHz

•

Modulation frequency 1kHz

•

RF level should be varied during the test to obtain good audio signal quality

•

Connect suitable antenna to signal generator

RM-412; RM-413

BB Troubleshooting

Page 3 –50 COMPANY CONFIDENTIAL Issue 1