User Guide

Service tools

Product specific tools

The table below gives a short overview of service devices that can be used for testing, error analysis, and

repair of product RM-412; RM-413. For the correct use of the service devices, and the best effort of workbench

setup, please refer to various concepts.

FS-86 Flash adapter

•

FS-86 is equipped with a clip interlock system

•

provides standardised interface towards Control Unit

•

multiplexing between USB and FBUS media, controlled by VUSB

MJ-180 Module jig

MJ-180 is meant for component level troubleshooting.

The jig includes RF interface for Bluetooth, WLAN and GPS. In addition,

it has the following features:

•

Provides mechanical interface with the engine module

•

Provides galvanic connection to all needed test pads in module

•

Multiplexing between USB and FBUS media, controlled by Vusb

•

Connector for control unit

•

Access for Audio-, MMC, and USB connectors

RJ-230 Soldering jig

The jig is used for soldering and as a rework jig for the system module.

It is made of lead-free rework compatible material.

RM-412; RM-413

Service Tools and Service Concepts

Issue 1 COMPANY CONFIDENTIAL Page 2 –5