User guide

Remove the memory
card
Important: Do not remove the memory card during
an operation when the card is being accessed. Doing so
may damage the memory card and the device, and corrupt
data stored on the card.
1. Before you remove the memory card, press the power
key, and select Remove memory card. All applications
are closed.
2. When Removing memory card will close all open
applications. Remove anyway? is displayed, select
Yes.
3. Remove memory card and press 'OK' is displayed.
4. Press the memory card to release it from the slot.
5. Pull out the memory card, and close the memory card
slot cover. If the device is switched on, select OK.
Antenna locations
Your device may have internal and external antennas.
Avoid touching the antenna area unnecessarily while the
antenna is transmitting or receiving. Contact with
antennas affects the communication quality and may
cause a higher power level during operation and may
reduce the battery life.
Switch the device on or
off
Switch on
1. Press and hold the power key.
2. If prompted, enter a PIN code or lock code,
and select OK. The preset lock code is 12345.
If you forget the code and your device is
locked, your device will require service and
additional charges may apply. For more
information, contact a Nokia Care point or your device
dealer.
Switch off — Press the power key briefly, and select
Switch off!.
Charge the battery
Your battery has been partially charged at the factory. If
the device indicates a low charge, do the following:
1. Connect the charger to a wall outlet.
2. Connect the charger plug to the device.
16
Get started