User guide

period. Enter a number for the time-out in minutes, or
select None to set off the autolock period. When the device
is locked, you can still answer incoming calls, and calls may
still be possible to the official emergency number
programmed into your device.
To set a new lock code, select Phone and SIM card > Lock
code. The preset lock code is 12345. Enter the current code
and then the new code twice. The new code can be 4-255
characters long. Both alphabets and digits can be used,
and both uppercase and lowercase alphabets are possible.
The device notifies you if the lock code is not properly
formatted.
Restore original settings
To restore the original device settings, select Menu > Ctrl.
panel > Settings and General > Factory settings. To
do this, you need your device lock code. After resetting,
the device may take a longer time to switch on.
Documents, contact information, calendar entries, and
files are unaffected.
Positioning settings
Select Menu > Ctrl. panel > Settings and General >
Positioning.
To use a specific positioning method to detect the location
of your device, select Positioning methods.
To select a positioning server, select Positioning server.
To select which measurement system you want to use for
speeds and distances, select Notation preferences >
Measurement system.
To define in which format the coordinate information is
displayed in your device, select Notation preferences >
Coordinate format.
E-mail key settings
Select Menu > Ctrl. panel > Settings and General.
To select which mailbox to open with the e-mail key, select
E-mail key settings > E-mail key, and press the scroll
key.
Telephone settings
Select Menu > Ctrl. panel > Settings and Phone.
Select from the following:
• Call — Define general call settings.
• Call divert — Define your call divert settings.
See "Call
divert", p. 31.
• Call barring — Define your call barring settings.
See
"Call barring", p. 32.
• Network — Adjust the network settings.
Call settings
Select Menu > Ctrl. panel > Settings and Phone >
Call.
Select from the following:
• Send my caller ID — Display your phone number to
the person you are calling.
• Send my internet call ID — Display your internet call
address to the person you are calling using an internet
115
Settings