User guide

and the approximate distance to it is shown inside the
compass ring.
Route guidance is designed to show the straightest route
and the shortest distance to the destination, measured in
a straight line. Any obstacles on the route, such as
buildings and natural obstacles, are ignored. Differences
in altitude are not taken into account when calculating the
distance. Route guidance is active only when you move.
To set your trip destination, select Options > Set
destination and a landmark as the destination, or enter
the latitude and longitude coordinates.
To clear the destination set for your trip, select Stop
navigation.
Retrieve position information
Select Menu > Applications > GPS > GPS data and
Position.
In the position view, you can view the position
information of your current location. An estimate of the
accuracy of the location is displayed.
To save your current location as a landmark, select
Options > Save position. Landmarks are saved locations
with more information, and they can be used in other
compatible applications and transferred between
compatible devices.
Trip meter
Select Menu > Applications > GPS > GPS data and Trip
distance.
The trip meter has limited accuracy, and rounding errors
may occur. Accuracy can also be affected by availability
and quality of GPS signals.
To turn tri p distance ca lc ulation on or off, select Options >
Start or Stop. The calculated values remain on the display.
Use this feature outdoors to receive a better GPS signal.
To set the trip distance and time and average and
maximum speeds to zero, and to start a new calculation,
select Options > Reset. To set the trip meter and total
time to zero, select Restart.
Positioning settings
Select Menu > Ctrl. panel > Settings and General >
Positioning.
Positioning methods
Select from the following:
• Integrated GPS — Use the integrated GPS receiver of
your device.
• Assisted GPS — Use Assisted GPS (A-GPS) to receive
assistance data from an assistance data server.
• Bluetooth GPS — Use a compatible external GPS
receiver with Bluetooth connectivity.
• Network based — Use information from the cellular
network (network service).
Positioning server
To define an access point and positioning server for
network-assisted positioning methods, such as assisted
GPS or network-based positioning, select Positioning
server. The positioning server may be preset by your
76
Positioning (GPS)