User guide

number. Enter the number, or select Find to retrieve a
number saved in Contacts.
To check the current diverting status, scroll to the diverting
option, and select Options > Check status.
To stop diverting calls, scroll to the diverting option, and
select Options > Deactivate.
Call barring
Select Menu > Ctrl. panel > Settings and Phone > Call
barring. If you have defined internet call settings, select
Voice call barring.
You can bar the calls that can be made or received with
the device (network service). To modify the settings, you
need the barring password from your service provider. Call
barring affects all call types.
Select from the following voice call barring settings:
• Outgoing calls — Prevent making voice calls with your
device.
• Incoming calls — Prevent incoming calls.
• International calls — Prevent calling to foreign
countries or regions.
• Incoming calls when roaming — Prevent incoming
calls when outside your home country.
• International calls except to home country
— Prevent calls to foreign countries or regions, but
allow calls to your home country.
To check the status of voice call barrings, select the barring
option and Options > Check status.
To deactivate all voice call barrings, select a barring option
and Options > Deactivate all barrings.
To change the password used for barring voice and fax
calls, select Options > Edit barring password. Enter the
current code, then the new code twice. The barring
password must be four digits long. For details, contact
your service provider.
Voice dialling
Your device supports enhanced voice commands.
Enhanced voice commands are not dependent on the
speaker’s voice, so do not need to record voice tags in
advance. The device creates a voice tag for the entries in
contacts, and compares the spoken voice tag to it. The
voice recognition in the device adapts to the main user’s
voice to recognise the voice commands better.
The voice tag for a contact is the name or nickname that
is saved on the contact card. To listen to the synthesised
voice tag, open a contact card, and select Options > Voice
tag details > Play voice tag.
Make a call with a voice tag
Note: Using voice tags may be difficult in a noisy
environment or during an emergency, so you should not
rely solely upon voice dialling in all circumstances.
When you use voice dialling, the loudspeaker is in use.
Hold the device at a short distance away when you say the
voice tag.
1. To start voice dialling, in the standby mode, press and
hold the right selection key. If a compatible headset
with the headset key is attached, press and hold the
headset key to start voice dialling.
32
Make calls